XP Home boot up does not load setting/users

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have "imaged" (using ghost 9.0) my original SATA drive to another SATA
drive and when attempting to only load with the imaged SATA drive the Windows
blue screen appears and the settings/user groups do not load. I then power up
the original SATA as the secondary drive and the imaged SATA drive loads all
setting which I am using now. How do I resolve?

Bob
 
I used the Ghost 9.0 to get the image. Should I have used the 2003 version of
Ghost? Also, can I load both the 9.0 version and the 2003 version>
 
Well, I did clone via Ghost 2003 and I have the same problem on my original
Disk. I did not erase all of the files/data on the "goto"volume. Is that an
issue?

Bob
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

CF boot issue 0
System does not boot when connecting hard drive to SATA card vs on-boardSATA controller 5
Windows 10 One of my previous builds is experiencing random, multiple BSODs 9
D845PEBT2 MOBO hangs up booting SATA 4
Strange W8.1 boot problem 20
primary drive 0 not found 5
WD Blue 6TB 4
XP Backup Utility vs. Disk Imaging? 10

Back
Top