workgroup

[Joe]

I just added a new computer to the workgroup and I cannot see anyone the the
workgroup. I can access the internet but not the local area network. The
computers are connected to the hub. The ADSL modem is connected to the
linksys router and the routher to the hub. It is working fine with the
other computers.

 

[Chuck]

I just added a new computer to the workgroup and I cannot see anyone the the
workgroup. I can access the internet but not the local area network. The
computers are connected to the hub. The ADSL modem is connected to the
linksys router and the routher to the hub. It is working fine with the
other computers.

Joe,

Are you running both Client for Microsoft Networks, and File and Printer Sharing
for Microsoft Networks (Local Area Connection - Properties), on each computer?
Do you have shares setup on each?

Are you running NetBIOS Over TCP/IP (Local Area Connection - Properties - TCP/IP
- Properties - Advanced - WINS) on each computer?

Make sure the browser service is running on each computer. Control Panel -
Administrative Tools - Services. Verify that the Computer Browser service is
started.

On any XP Pro computer, check to see if Simple File Sharing (Control Panel -
Folder Options - View - Advanced settings) is enabled or disabled. With XP Pro,
you need to have SFS properly set on each computer.

With XP Pro, if SFS is disabled, check the Local Security Policy (Control Panel
- Administrative Tools). Under Local Policies - Security Options, look at
"Network access: Sharing and security model", and ensure it's set to "Classic -
local users authenticate as themselves".

With XP Pro, if you set the Local Security Policy to "Guest only", make sure
that the Guest account is enabled, thru Local User Manager (Start - Run -
"lusrmgr.msc"), and has an identical, non-blank, password on all computers. If
"Classic", setup and use a common non-Guest account, with identical, non-blank,
password on all computers.

For XP Home, OR for XP Pro with Simple File Sharing enabled, make sure that the
Guest account is enabled (for XP Pro, thru Local User Manager (Start - Run -
"lusrmgr.msc")), on each computer.

Do any of the computers have a software firewall (ICF or third party)? If so,
you need to configure them for file sharing, by opening ports TCP 139, 445 and
UDP 137, 138, 445, and / or by identifying the other computers as present in the
Local (Trusted) zone. Firewall configurations are a very common cause of
(network) browser, and file sharing, problems.

And Joe, please don't contribute to the spread and success of email address
mining viruses. Learn to munge your email address properly, to keep yourself a
bit safer when posting to open forums. Protect yourself and the rest of the
internet - read this article.
http://www.mailmsg.com/SPAM_munging.htm

Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.

 

[***** charles]

Thanks for the post Chuck. I will be adding
a W98SE machine to a LAN that is a bunch
of WXPH machines. Would your suggestions
be any different in this senario? as apossed to
just adding another XP box?

thanks,
charles....

 

[Chuck]

Thanks for the post Chuck. I will be adding
a W98SE machine to a LAN that is a bunch
of WXPH machines. Would your suggestions
be any different in this senario? as apossed to
just adding another XP box?

thanks,
charles....

Charles,

Windows 98 uses share-level or user-level authorisation - user-level
authorisation is similar to Windows XP Home.

If you have no security concerns (all users are trusted equally, so you will be
leaving all shares open to each computer, unrestricted?), the above suggestions
should apply.

For details, see the Microsoft document:
<http://www.microsoft.com/downloads/...db-aef8-4bef-925e-7ac9be791028&DisplayLang=en>

Please start another thread describing your LAN arrangement, listing each
computer with operating system, if any problems.

And Charles, please don't contribute to the spread and success of email address
mining viruses. Learn to munge your email address properly, to keep yourself a
bit safer when posting to open forums. Protect yourself and the rest of the
internet - read this article.
http://www.mailmsg.com/SPAM_munging.htm

Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.

 

[Joe]

Thanks for the info Chuck.

Joe,

Are you running both Client for Microsoft Networks, and File and Printer Sharing
for Microsoft Networks (Local Area Connection - Properties), on each computer?
Do you have shares setup on each?

Are you running NetBIOS Over TCP/IP (Local Area Connection - Properties - TCP/IP
- Properties - Advanced - WINS) on each computer?

Make sure the browser service is running on each computer. Control Panel -
Administrative Tools - Services. Verify that the Computer Browser service is
started.

On any XP Pro computer, check to see if Simple File Sharing (Control Panel -
Folder Options - View - Advanced settings) is enabled or disabled. With XP Pro,
you need to have SFS properly set on each computer.

With XP Pro, if SFS is disabled, check the Local Security Policy (Control Panel
- Administrative Tools). Under Local Policies - Security Options, look at
"Network access: Sharing and security model", and ensure it's set to "Classic -
local users authenticate as themselves".

With XP Pro, if you set the Local Security Policy to "Guest only", make sure
that the Guest account is enabled, thru Local User Manager (Start - Run -
"lusrmgr.msc"), and has an identical, non-blank, password on all computers. If
"Classic", setup and use a common non-Guest account, with identical, non-blank,
password on all computers.

For XP Home, OR for XP Pro with Simple File Sharing enabled, make sure that the
Guest account is enabled (for XP Pro, thru Local User Manager (Start - Run -
"lusrmgr.msc")), on each computer.

Do any of the computers have a software firewall (ICF or third party)? If so,
you need to configure them for file sharing, by opening ports TCP 139, 445 and
UDP 137, 138, 445, and / or by identifying the other computers as present in the
Local (Trusted) zone. Firewall configurations are a very common cause of
(network) browser, and file sharing, problems.

And Joe, please don't contribute to the spread and success of email address
mining viruses. Learn to munge your email address properly, to keep yourself a
bit safer when posting to open forums. Protect yourself and the rest of the
internet - read this article.
http://www.mailmsg.com/SPAM_munging.htm

Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.

 

[Chuck]

Thanks for the info Chuck.

Glad to help, Joe. Hope it did. ;-)

Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.