WinXP Home with black screen

R

Radek Cvejn

I have problem with Win XP home, in HW manager I was not see any graphic
adapter, only in graphic accesories was VGAsafe. I disallow there adapter
and I have black screen in every graphical mode (VGA safe made, last good
configuration, system repair etc.). Where I enable this adapter, what I can
edit?
Thanks

R.C.
 
K

Kelly

Hi,

If you can get to safe mode, go to Start/Run/Msconfig/Boot.ini and uncheck
/Basevideo.
 
R

Radek Cvejn

Sorry but I see nothing on my display only black screen. Some configuration
in prompt?
 
K

Kelly

Hi,

My only other suggestion would be to do a repair install:

Repair the Windows XP Installation - Note: You will forfeit all MS Updates.

Configure your computer to start from the CD-ROM drive. For more information
about how to do this, please refer to your computer's documentation or
contact your computer manufacturer.

Insert your Windows XP compact disc (CD) into your CD-ROM drive or DVD-ROM
drive, and then restart your computer.

(You can also boot with a Windows 98/Me Startup disk with CD support and run
WINNT.EXE in the I386 folder on the CD)

When the "Press any key to boot from CD" message is displayed on your
screen, press a key to start your computer from the Windows XP CD.

When you see the following message displayed on the Welcome to Setup screen,
press ENTER: To setup Windows XP now, press ENTER.

At this point an option to press R to enter the Recovery Console is
displayed. Do not select this option.

On the Windows XP Licensing Agreement screen, press F8 to agree to the
license agreement. Make sure that your current installation of Windows XP is
selected in the box, and then press the R key to repair Windows XP. Follow
the instructions on the screen to complete Setup.

Perform an In-Place Upgrade (Reinstallation) of Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q315341

Hope all goes well and keep us posted.
 
R

Radek Cvejn

It same problem, if setup go to graphic mode, I see only black screen.

VGAsafe mode is disabled in all modes. I have to enable disabled device
(VGAsafe), but I don» know why ?

R.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top