King Kissel said:
Hello. I have a desktop with Win XP Pro in my room with a
Linksys WMP54G wireless adaptor which connects downstairs
to a Linksys WRT54G router running Win 2000 Pro. The night
before, I was trying to update a game online, and once it
got so far, it would disconnect and tell me that there were
connection problems. After 4 times, I brought the computer
downstairs and hooked it directly into the router. It
wouldn't even connect through that. I then unplugged the
router and ran the modem directly into the computer. Still
nothing. I called Linksys tech help tonite and when I went
to dos and typed ipconfig/renew, I got the error "an
operation was attempted on something that is not a socket."
They told me to go to the windows site and follow the
directions. I have deleted and reinstalled the Winsock and
Winsock 2 directories with regedit, but still the same
problem. Does anyone know what else the problem could be,
or another solution? I would be very much obliged with
anything anyone could give me because I have no clue what
is wrong! Thanks alot in advance!
==================================================
Please read this whole reply before proceeding with any suggestions.
Issue:
on this XP Home/Pro computer,
when trying to browse the Internet,
you are getting "Page Cannot Be Displayed" and
when you go to the command prompt window
(Start > Run > cmd)
and run ipconfig /all, you get an APIPA
(Automatic Private Internet Protocol Address)
in the form of 169.254.x.x.
Then immediately run ipconfig /renew, you get this error message:
"An operation was attempted on something that is not a socket"
or
"Unable to contact DHCP server"
If so, you probably have a damaged winsock2 key in the registry.
You should check System Information (winmsd)
START > RUN - type in winmsd and click OK
Note the value for the Windows Directory (usually C:\Windows but not always)
Then expand Components / Network / click on Protocol -
if the section headings item of "Name" have a value
starting with anything other than MSAFD or RSVP
then that is probably what is causing the problem.
Examples:
MSAFD Tcpip [TCP/IP]
MSAFD Tcpip [UDP/IP]
RSVP UDP Service Provider
RSVP TCP Service Provider
MSAFD NetBIOS [\Device\NetBT_Tcpip...
and so on
It may be a third-party firewall or a Spyware or a Virus.
("New.Net" is a common spyware for example)
Make sure that MSCONFIG (System Configuration Utility) is in Normal Startup
and then see if uninstalling the third party firewall
(best done from its own uninstall program if available)
or the Spyware from Add Remove Programs will
resolve the issue. If it's a virus, then only an Anti Virus Program
will be able to deal with that.
You may want to try downloading either Ad-Aware 6 or Spybot
to another computer and then installing one of them on the infected XP Home/Pro
computer and try to wipe out Spyware and see if that resolves the issue.
Ad-aware 6.0 build 181
http://download.com.com/3000-2144-10214379.html?tag=list
Spybot - Search & Destroy 1.2
http://download.com.com/3000-2144-10194058.html?tag=list
If none of that works or is possible, you could try this method
for replacing the winsock and winsock2 registry keys:
Uninstall any third-party proxy software or firewall programs before proceeding.
Step 1: Delete registry keys
A)Open Regedit from the Run line (Start > Run - regedit)
B)Go to both of the following keys, EXPORT each of them, and then delete them:
(To export a key, you right click on it and choose "export" - you can choose where to export them to -
DESKTOP is handy -
and you need to type in a file name such as "exported Winsock key" / "exported WinSock2 key"
and then click on SAVE)
HKLM\SYSTEM\CurrentControlSet\Services\Winsock
HKLM\SYSTEM\CurrentControlSet\Services\WinSock2
C)Restart the computer
NOTE: It is important to restart the computer after deleting the Winsock keys.
Doing so causes the XP operating system to recreate shell entries for those two
keys. If this is not done, the next step does not work correctly.
Step 2: Install TCP/IP on top of itself
Go to Control Panel | Network Connections
A)Open the properties window of the network connection (Local Area Connection)
B)Click Install
C)Click Protocol, then Add
D)Click Have Disk
E)Type the path to the \%systemroot%\inf folder (usually C:\Windows\inf) and click OK
(if you try to click Browse, then browse to the \inf folder,
it may not show up in the list)
F)You should now see "Internet Protocol (TCP/IP)" in the list of available
protocols. Select it and click OK.
G)Restart the computer
When the computer reboots you will have functional Winsock keys.
If so, then be sure to delete the exported winsock and winsock2 reg files.
(You don't want to accidentally put them back in the registry)
Side effects and possible problems:
This method will restore basic functionality to the Winsock keys, but is not a
complete rebuild. On a default install of Windows XP the registry key:
HKLM\SYSTEM\CurrentControlSet\Services\Winsock2\
Parameters\Protocol_Catalog9\Catalog_Entries will have 11 sub-keys.
When applying this method, the Catalog_Entries will only have 3 sub-keys.
However, it works and there does not appear to be any side effects.
The missing entries relate back to the:
HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces key.
Also, third-party proxy software or firewalls may need to be reinstalled.
==========================================================
