windows xp pro startup problem?

  • Thread starter Thread starter glen vw
  • Start date Start date
G

glen vw

Help,
Windows XP Pro startup problem.........


I asked this question earlier and got a response, but it
didn't work so I am asking again with a better
description of the problem this time.......


When I turn on my computer it starts to boot normally
with access to the bios screen, but then it goes into a
screen that states windows did not start successfully and
gives some choices, they are:

1. safe mode
2. safe mode with networking
3. safe mode with command prompt
4. last known good configuration
5. start windows normally

I can select number "1", "4" or "5" from above and the
computer will go into blue screen wanting to check the
file system on c: and it runs through and finds no
problems and then just restarts the computer and goes
back into this problem all over again of going to the
windows that states did not start sucessfully screen...

or I can select numbers "2" or "3" from the list above
and it starts to run through loading drivers but stops
and waits a few seconds and then restarts the computer
and goes into this problem all over again of going to the
screen stating did not start sucessfully...

I have not changed any settings or added any new software
or hardware recently.

I was thinking maybe it could be my hard-drive having a
problem, but it was, it wouldn't run through checking the
file system on c: and state no problems found, would it?
(sorry, I'm a rookie)

Any ideas of what may be causing this or a solution? I
would be very thankful for any help.

Thanks,

Glen.
 
glen vw wrote:

When I turn on my computer it starts to boot normally
with access to the bios screen, but then it goes into a
screen that states windows did not start successfully and
gives some choices, they are:

1. safe mode
2. safe mode with networking
3. safe mode with command prompt
4. last known good configuration
5. start windows normally

I can select number "1", "4" or "5" from above and the
computer will go into blue screen wanting to check the
file system on c: and it runs through and finds no
problems and then just restarts the computer and goes
back into this problem all over again of going to the
windows that states did not start sucessfully screen...

or I can select numbers "2" or "3" from the list above
and it starts to run through loading drivers but stops
and waits a few seconds and then restarts the computer
and goes into this problem all over again of going to the
screen stating did not start sucessfully...

I have not changed any settings or added any new software
or hardware recently.

I was thinking maybe it could be my hard-drive having a
problem, but it was, it wouldn't run through checking the
file system on c: and state no problems found, would it?
(sorry, I'm a rookie)

(various snippage) - To determine if your hard drive is failing, from
another machine go to the hard drive mftr.'s website and download a
diagnostic utility. You will use this to make a bootable floppy. There
will be instructions on the website. Boot your sick machine with the
floppy you made and run a full diagnostic. If the hard drive is
failing, you'll need to replace it with a new one, reinstall Windows
and programs from cd's and restore your data from backups.

If the hard drive is healthy, since you can't get into Windows at all,
do a Repair Install. Instructions are here:

http://www.michaelstevenstech.com/XPrepairinstall.htm

Post back if you need more help.

Malke
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads


Back
Top