Windows is unable to format disk

D

djudge33

I'm trying to format some CD-RW disks to make my backup disks and only once
out of about 10 tries have I been successful. I keep getting a message that
says "windows is unable to format disk" Any suggestions? Thanks in advance
 
H

Hiren

Physically bad/damaged media is the most frequent cause behind this.

I'm trying to format some CD-RW disks to make my backup disks and only once
out of about 10 tries have I been successful. I keep getting a message that
says "windows is unable to format disk" Any suggestions? Thanks in advance
 
D

djudge33

These are brand new Memorex disks so that probably isn't the case here.
Right? I don't know.
 
H

Hiren

Make sure you are not running too many applications while the discs are
being formatted.Do you face problems reading CD-RWs too?A lesser speed too
generally helps.

These are brand new Memorex disks so that probably isn't the case here.
Right? I don't know.
 
M

Malke

djudge33 said:
These are brand new Memorex disks so that probably isn't the case here.
Right? I don't know.

If you can format the disks in another computer, you know they are OK. In
that case, your optical drive may be going.

As a side note, I would never use CD-RW disks for anything. You want your
disks to be readable on any system and unless that system has the same
packet writing software installed (or a UDF reader), your disks with the
carefully backed-up data on them will appear blank.

Better to just use straight CD/DVD-R disks instead. If you have problems
writing to those, then you know there's something wrong with the optical
drive.

Malke
 
M

mikeyhsd

make sure you are using media type that is recommended for your drive.
check the specs that came with the drive or look them up on the internet.

not all brands/type will work with all drives.

second.

you probably should terminate all not needed programs while writing to the discs.

I usually use MSCONFIG and disable all, reboot and then write to discs.




(e-mail address removed)



I'm trying to format some CD-RW disks to make my backup disks and only once
out of about 10 tries have I been successful. I keep getting a message that
says "windows is unable to format disk" Any suggestions? Thanks in advance
 
C

Colin Barnhorst

The drive may need cleaning. There are separate read and write lens and the
write lens may need cleaning.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top