Windows 2003 PPTP Blues

  • Thread starter Thread starter alan
  • Start date Start date
A

alan

Hi all -

I just set up PPTP on a Windows 2003 box and it works like a charm.
However, when connected, the clients cannot browse externally.

What do I need to change under RAS Routing to allows clients to
browse externally when they are connected via PPTP
 
"Use default gateway on remote network" - it's a setting in the properties
of the PPTP connection on the client side.
 
That works but even though I am connected via PPTP, I can't seen
internal resources now.

The server is not running NAT but is behind a firewall that is running
NAT if this detail is applicable.
 
Most likely the local LAN uses the same IP range as the remote NAT. You
need to change that.
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Can't ping VPN clients from LAN 1
Routing to multiple networks behind 2003 PPTP server? 4
How to use NETSH to delete PPTP/L2TP ports? 0
only 1 pptp outgoing connection works - if 2 then one connection drops ? 2
PPTP for all traffic from/to W2K client 1
PPTP Pass through for VPN not on RRAS 3
server to server pptp (1 nic per server) (server is dc) 7
where did the pptp wan miniports go? 1

Back
Top