w2k will not install

G

Guest

Hello,

Clean installation, setup CD goes through the motions
until it stops with "The File Ibrtfdc.sys is corrupted"
and setup stops. Changed to a different hard drive still
the same.. Installed in to another box worked fine.. Any
help will be appreciated

Pat
 
P

Pat

Ok, checked Ram and reinstalled in another slot. Setup
now continued but stops at "ntfs.sys" is corrupted. Will
try to re-format for the 10th time. Any Help will be
appreciated. Pat
 
B

Bjorn Landemoo

Pat

It might be bad RAM, so that the copy and expand operation that happens
during install results in corrupted files. RAM is used during this
procedure.

It could also be that CD drive in the non-working machine has problem
reading your CD.

Where does the file Ibrtfdc.sys come from? I cannot find any reference to a
driver with this name, anywhere.

Best regards

Bjorn
 
G

Guest

Thanks, Ive checked everything else but the RAM, it is
new so I will go get it exchanged see if that helps.
Thanks again..
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Reinstall W2K 1
Cannot copy files during install 3
W2k hangs on install at networking settings 1
W2K Install on 2nd HDD 1
Using W2k CD w/SP 4 added, but setup asks for SP 3 CD 6
Installing over Linux-getting 'inaccesible boot device' during W2K install 2
Windows looping install 3
W2K setup problems 1

Top