Vista and XP Network issue

G

Guest

I am trying to add a Vista computer to an existing home network, but having
difficulty. The XP computers can see the Vista computer, but not the other
way. Everything appears to be setup correctly, with Netword Discovery set to
On, all the computers on the same Workgroup, etc. Still I cannot map a
network drive or connect to a network printer on the Vista computer. Any
ideas would be greatly appreciated. Thanks.
 
R

Robert L \(MS-MVP\)

If turn off firewall, can you ping XP by IP? Or this search result may help,

troubleshooting is not accessible errorTroubleshooting "... is not
accessible" error step by step. When try to access a remote computer, you
may receive the following error messages: ...
www.howtonetworking.com/Troubleshooting/notaccessibale0.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top