video driver for ECS Mini-ITX board

[Z.K.]

Does anyone know where I can get a video driver for a ECS Mini-ITX
board? It is an older board and I can't seem to find one that works
well enough. It did not come with a driver CD as I bought it used.

EA=0016EC3A25B3
EVCM-F
J31104E60804936
ECS
Elite Group

I did find a driver on www.driversguide.com, but it does not work and
the device manager says that it is unable to load the driver. Right now
I am sitting at 800 x 600 at 16 colors which really sucks. It does work
well with linux, but I wanted to use it with Windows as the software
that I want to use works better with Windows. Hopefully, someone can
help me.

Z.K.

 

[Adrian C]

Does anyone know where I can get a video driver for a ECS Mini-ITX
board? It is an older board and I can't seem to find one that works
well enough. It did not come with a driver CD as I bought it used.

EA=0016EC3A25B3
EVCM-F
J31104E60804936
ECS
Elite Group

Doing a google on EVCM-F I find a similar PCCHIPS board with related
users hunting around for support.

If yours looks similar to ebay item#220327480898, I suspect this page
will be your last port of call. Could you post back which VIA design
looks closest and your successes? It will help others.

<http://www.via.com.tw/en/products/mainboards/legacy.jsp>

 

[Bob I]

The manufacturers site is where you should get it. (google points to here)
http://www.ecsusa.com/ECSWebSite/Downloads/Category_Download.aspx?MenuID=6&LanID=9

 

[Paul]

Does anyone know where I can get a video driver for a ECS Mini-ITX
board? It is an older board and I can't seem to find one that works
well enough. It did not come with a driver CD as I bought it used.

EA=0016EC3A25B3
EVCM-F
J31104E60804936
ECS
Elite Group

I did find a driver on www.driversguide.com, but it does not work and
the device manager says that it is unable to load the driver. Right now
I am sitting at 800 x 600 at 16 colors which really sucks. It does work
well with linux, but I wanted to use it with Windows as the software
that I want to use works better with Windows. Hopefully, someone can
help me.

Z.K.

EVCM-F - I see a sticker placed over the label on the motherboard.
The Northbridge is CLE266, the Southbridge is VT8235M. Processor
could be a VIA C3.

http://www.auctiva.com/hostedimages...194314662&images=194314662&formats=0&format=0

http://img.auctiva.com/imgdata/7/0/0/6/0/4/webimg/194314662_o.jpg

So you'd look for a CLE266 graphics driver on viaarena.com .
Example of integrated graphics drivers, here.

http://www.viaarena.com/default.aspx?PageID=420&OSID=1&CatID=1160&SubCatID=101

Maybe while you're booted into Linux, you can get some
enumeration information from the working graphics driver
and setup, just to confirm the identity of the chip
and that is is a Unichrome graphics device.

Paul

 

[Z.K.]

Does anyone know where I can get a video driver for a ECS Mini-ITX
board? It is an older board and I can't seem to find one that works
well enough. It did not come with a driver CD as I bought it used.

EA=0016EC3A25B3
EVCM-F
J31104E60804936
ECS
Elite Group

I did find a driver on www.driversguide.com, but it does not work and
the device manager says that it is unable to load the driver. Right now
I am sitting at 800 x 600 at 16 colors which really sucks. It does work
well with linux, but I wanted to use it with Windows as the software
that I want to use works better with Windows. Hopefully, someone can
help me.

Z.K.

I just wanted to thank everyone for helping me. I finally got it to
work by running the install of the CLE266_16-94-44-45_XP_Rotation_logod
folder that I download from the
http://www.viaarena.com/default.aspx?PageID=420&OSID=1&CatID=1160&SubCatID=101
website. I would have sworn I tried it before, but no matter, at least
it works now.

Z.K.