very slow p.c

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

help...I am out of ideas..I am trying to work out why my father's p.c is so
slow???
It is XP, and I have checked for spyware and the like and defraged it. The
screen also dissappears from top to bottom(like a wave)then comes back after
a lot of the icons on the desktop return, in its favor, after its been
running a while it does sort of warm up and behave for a while....please help
if you can.

ta v much
 
Poor system performance can be the result of a single problem or a
combination of factors. Listed
below are issues, which you may wish to examine if you are experiencing poor
performance after
the boot process has completed. Some items may help with slow starting of
Windows XP but the
list has not been prepared for tackling that problem. Work through the list
until you achieve an
acceptable result.
Regular and effective housekeeping is essential. What you do and how often
you do it will depend
on how you use your computer. A suggested routine may include:
1. In Outlook Express empty your Deleted Items folder.
2. In Outlook Express run File, Folder, Compact All whilst OFFLINE.
3. Run Disk Cleanup. Start, Programs, Accessories, System Tools, Disk
Cleanup with
Temporary Internet Files, Offline Web Pages (optional), System Restore (
more Options tab )
and Recycle Bin selected for deletion. If you have more than one drive /
partition you may
need to do this operation for each drive / partition.
4. Remove Cookies. Start, Control Panel, Internet Options, General, Delete
Cookies.
5. Run Disk Defragmenter.

Check whether you could reduce the number of days the History of sites
visited is retained. Start,
Control Panel, Internet Options, General, History.
Spyware causes many problems. If not installed download Adaware and / or
update Reference file
from http://www.lavasoftusa.com/support/download/ and use it to remove
parasites. If Spyware
persists as a problem try a Hosts file.
http://www.accs-net.com/hosts/what_is_hosts.html
Slow performance resulting from insufficient memory, causing over reliance
on virtual memory,
may be especially noticed by those upgrading to Windows XP from an earlier
version of Windows.
Windows XP will run with 64 MB of RAM memory. However, a minimum of 256 MB
is
recommended and many users will recommend 512 MB. You may check on pagefile
(virtual
memory) usage with Page File Monitor for XP:
http://www.dougknox.com/

Check how much free space you have on the hard drive / partition where your
pagefile is located.
You need a minimum of 15% but 20% or more is better.

Check your setting for the Indexing Service. Start, Administrative Tools,
Services, Indexing
Service. The default setting is Manual. Check that it is not running. More
information here:
http://www.blackviper.com/WinXP/service411.htm#Indexing_Service
You can have too many programmes running in the background. Close
programmes/windows after
use. Check whether all the programmes loading when Windows is started are
really necessary.
http://aumha.org/a/loads.htm
Check whether you can identify slow performance with a particular programme.
Look in Google to
see whether others have encountered the same problem and found a solution.
http://groups.google.com/
Are there any error messages in Event Viewer? You can access Event Viewer by
selecting Start,
Administrative Tools, and Event Viewer. When researching the meaning of the
error, information
regarding Event ID: and Source Description is important.
HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;308427&Product=winxp

~~~~~~


Hope this helps.

Gerry
~~~~~~~~~~~~~~~~~~~~~~~~
FCA

Stourport, Worcs, England
Enquire, plan and execute.
~~~~~~~~~~~~~~~~~~~~~~~~
 
Thank you I will try everything you listed. xx

Gerry Cornell said:
Poor system performance can be the result of a single problem or a
combination of factors. Listed
below are issues, which you may wish to examine if you are experiencing poor
performance after
the boot process has completed. Some items may help with slow starting of
Windows XP but the
list has not been prepared for tackling that problem. Work through the list
until you achieve an
acceptable result.
Regular and effective housekeeping is essential. What you do and how often
you do it will depend
on how you use your computer. A suggested routine may include:
1. In Outlook Express empty your Deleted Items folder.
2. In Outlook Express run File, Folder, Compact All whilst OFFLINE.
3. Run Disk Cleanup. Start, Programs, Accessories, System Tools, Disk
Cleanup with
Temporary Internet Files, Offline Web Pages (optional), System Restore (
more Options tab )
and Recycle Bin selected for deletion. If you have more than one drive /
partition you may
need to do this operation for each drive / partition.
4. Remove Cookies. Start, Control Panel, Internet Options, General, Delete
Cookies.
5. Run Disk Defragmenter.

Check whether you could reduce the number of days the History of sites
visited is retained. Start,
Control Panel, Internet Options, General, History.
Spyware causes many problems. If not installed download Adaware and / or
update Reference file
from http://www.lavasoftusa.com/support/download/ and use it to remove
parasites. If Spyware
persists as a problem try a Hosts file.
http://www.accs-net.com/hosts/what_is_hosts.html
Slow performance resulting from insufficient memory, causing over reliance
on virtual memory,
may be especially noticed by those upgrading to Windows XP from an earlier
version of Windows.
Windows XP will run with 64 MB of RAM memory. However, a minimum of 256 MB
is
recommended and many users will recommend 512 MB. You may check on pagefile
(virtual
memory) usage with Page File Monitor for XP:
http://www.dougknox.com/

Check how much free space you have on the hard drive / partition where your
pagefile is located.
You need a minimum of 15% but 20% or more is better.

Check your setting for the Indexing Service. Start, Administrative Tools,
Services, Indexing
Service. The default setting is Manual. Check that it is not running. More
information here:
http://www.blackviper.com/WinXP/service411.htm#Indexing_Service
You can have too many programmes running in the background. Close
programmes/windows after
use. Check whether all the programmes loading when Windows is started are
really necessary.
http://aumha.org/a/loads.htm
Check whether you can identify slow performance with a particular programme.
Look in Google to
see whether others have encountered the same problem and found a solution.
http://groups.google.com/
Are there any error messages in Event Viewer? You can access Event Viewer by
selecting Start,
Administrative Tools, and Event Viewer. When researching the meaning of the
error, information
regarding Event ID: and Source Description is important.
HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;308427&Product=winxp

~~~~~~


Hope this helps.

Gerry
~~~~~~~~~~~~~~~~~~~~~~~~
FCA

Stourport, Worcs, England
Enquire, plan and execute.
~~~~~~~~~~~~~~~~~~~~~~~~
 
This has happened to me several times after a failed game installation. Go to
the control panel and get to the properties of your primary IDE controller.
Select the advanced settings. The "current transfer mode" should say DMA5 (or
whatever upper transfer limit that "C:" drive has. If it says PIO mode,
everything take 10-30 times longer to execute.

Quick and easy fix:
Delete both the primary and secondary controller channels. Say no when it
asks you if you want to reboot. Then back everything off and do a normal
reboot. XP will find and install the controller drivers properly and at the
correct transfer mode. You will probably have to reboot again after after XP
re-installs those controller drivers.

All this is assuming you have the latest drivers for everything, done all
the standard procedures to eliminate bottlenecks, anti-virus, anti-spyware,
on and on...

TK
USCG Academy Ship Simulators Engineer
 
-----Original Message-----
This has happened to me several times after a failed game installation. Go to
the control panel and get to the properties of your primary IDE controller.
Select the advanced settings. The "current transfer mode" should say DMA5 (or
whatever upper transfer limit that "C:" drive has. If it says PIO mode,
everything take 10-30 times longer to execute.

Quick and easy fix:
Delete both the primary and secondary controller channels. Say no when it
asks you if you want to reboot. Then back everything off and do a normal
reboot. XP will find and install the controller drivers properly and at the
correct transfer mode. You will probably have to reboot again after after XP
re-installs those controller drivers.

All this is assuming you have the latest drivers for everything, done all
the standard procedures to eliminate bottlenecks, anti- virus, anti-spyware,
on and on...

TK
USCG Academy Ship Simulators Engineer


.
Dear Tom, I hope funky took your advice to check the IDE
controllers settings.
I almost pulled my last hair when I came accross your
post. I had run and disconected all the ini files along
with startup and process, I mean there is no reason for a
p4 1.8 to slow boot and did much of funky stuff, spyware,
antivirus etc.
To the end then Tom I just wanted to THANK YOU for your
post, very helpfull to all and I noticed this is
something that is happenign all to often. If you don't
mind it may be a good idea to create a new post "Slow
boot up" so when people search they may find it easier,
just a thought. Thanks again Tom.

Sincerely,

Emilio.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top