G
Guest
I've been getting BSODs lately and I'm not able to figure out what is causing
the problem. Here's some error messages I got:
#1 (in descending order of appearance):
Error code 100000be, parameter1 f33341bf, parameter2 088dd121, parameter3
b8590830, parameter4 0000000a.
I remember it said on BSOD "an attempt was made to write to read-only
memory" and had a filename attached at the end of the code: psched.sys
#2:
Error code 10000050, parameter1 befb7650, parameter2 00000001, parameter3
f6fa3dd9, parameter4 00000002.
"PAGE_FAULT_IN_NONPAGED_AREA" and filename Alcxsens.sys
#3:
Error code 000000d1, parameter1 00000082, parameter2 00000002, parameter3
00000001, parameter4 baf8ff0a.
"DRIVER_IRQL_NOT_LESS_OR_EQUAL" and filename tcpip.sys (add. BAF8FF0A base
at BAF8D000 datestamp 4294d4d3
#4:
Error code 0000007f, parameter1 0000000d, parameter2 00000000, parameter3
00000000, parameter4 00000000.
#5:
Error code 1000008e, parameter1 c000001d, parameter2 f3d47328, parameter3
f797eb70, parameter4 00000000.
This should be it. I've been getting more BSODs, but I thought it was the
WinXP fault and so I reinstalled the OS. But I kept receiving these errors
and so I upgraded BIOS (on my new Epox motherboard) and installed the latest
version of motherboard drivers (incl. networking drivers).
Is this a network problem as I see psched.sys and tcpip.sys are typical
network drivers? Hardware or software? Maybe something else?
I've got a few minidump files, if they're of any extra help at all..
Any help on this subject would be greatly appreciated!
the problem. Here's some error messages I got:
#1 (in descending order of appearance):
Error code 100000be, parameter1 f33341bf, parameter2 088dd121, parameter3
b8590830, parameter4 0000000a.
I remember it said on BSOD "an attempt was made to write to read-only
memory" and had a filename attached at the end of the code: psched.sys
#2:
Error code 10000050, parameter1 befb7650, parameter2 00000001, parameter3
f6fa3dd9, parameter4 00000002.
"PAGE_FAULT_IN_NONPAGED_AREA" and filename Alcxsens.sys
#3:
Error code 000000d1, parameter1 00000082, parameter2 00000002, parameter3
00000001, parameter4 baf8ff0a.
"DRIVER_IRQL_NOT_LESS_OR_EQUAL" and filename tcpip.sys (add. BAF8FF0A base
at BAF8D000 datestamp 4294d4d3
#4:
Error code 0000007f, parameter1 0000000d, parameter2 00000000, parameter3
00000000, parameter4 00000000.
#5:
Error code 1000008e, parameter1 c000001d, parameter2 f3d47328, parameter3
f797eb70, parameter4 00000000.
This should be it. I've been getting more BSODs, but I thought it was the
WinXP fault and so I reinstalled the OS. But I kept receiving these errors
and so I upgraded BIOS (on my new Epox motherboard) and installed the latest
version of motherboard drivers (incl. networking drivers).
Is this a network problem as I see psched.sys and tcpip.sys are typical
network drivers? Hardware or software? Maybe something else?
I've got a few minidump files, if they're of any extra help at all..
Any help on this subject would be greatly appreciated!