USB2

A

Andrew

I have installed a Sweex PCI usb2 hub and it is showing
up in hardware as standard enhanced PCI to USB host
controller or it could be via rev 5 or later usb
universal host controller. I'm not sure which one. I just
want to know if the right drivers have been loaded so it
works at the correct speed for usb2 or do I need to
update the driver to obtain full functionality?
 
C

Cari \(MS-MVP\)

You need to install SP1 or SP2 for USB2.0 functionality. If the words
Enhanced or 2.0 appear, you do have USB2.0 drivers.
 
M

Mike

I have a similar problem. Asus P5AD2 Premium motherboard.
When I had SP1, everything worked fine. Once SP2 was
installed, all 8 USB 2.0 ports became recognized as 1.1
(no "enhanced"). I tried using a USB 2.0 device, and sure
enough, it worked at 1.1 speeds...which gets very
irritating when you copy files that are 1GB+. Any help
would be appreciated. Thanks in Advance,
- Mike
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

standard enhanced PCI to USB host controller 1
How can I tell if my machines USB2 controller is there/work 4
Nec usb2 card with no usb2 speed? 3
usb2.0 pci and external harddisk 10
USB 2.0 1
XP restarts on shutdown 1
usb 2.0 pci card 4
USB2 v/s USB in XP - help? 7

Top