USB and Power management issues

  • Thread starter Thread starter hawaiianmon
  • Start date Start date
H

hawaiianmon

First off. I have quite a few IBM Thinkpads. T42.

These machines need to be used with a local medical center. The EKG
machines need to be used off the USB ports, however they are losing
connections once and a while. I have already disabled the power saving
option from the USB Root Hub(s) in the Device Manager. Normally this
would take care of the problem. However when we reboot the laptop
after making the power saving adjustment through the device manager the
system flashes a BSOD, then goes into a reboot cycle. We have to use
Safe Mode and remove the changes to get windows to work again.

I have gotten all the IBM firmware and BIOS updates, Windows Updates,
and the IBM program updates. Nothing is working.

IBM T41 laptops work just fine with this though.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Power tab on USB properties in Device Manager 4
USB Storage Devices Cause Memory Error and XP restarts 1
Windows 10 Win 10 not seeing USB sticks 8
plug'n'play needs "Scan For Hardware Changes" in device manager beforeshowing new devices 1
Power Surge on Hub Port 3
page_fault in non-paged_area ntfs.sys Stop 0x00000050 in anymode 3
USB Woes / WinXP 5
New USB hub, now have USB 1.1 vs 2.0 problem 2

Back
Top