USB 1.1 vs 2.0

  • Thread starter Thread starter Adam
  • Start date Start date
A

Adam

can anyone tell me how i can tell if my computer supports
USB 2.0?

thanks,
adam
 
plug in a high speed usb device and see if windows xp says high speed device
plugged into non high speed port

If its a couple years old, chances are it doesn't, espcially if its a cheap
dell or hp or something
 
If your are using a XP based PC, then in Device Manager, under USB, you
should see an "enhanced" controller. If you do, you may have a USB 2.0
controller. Just make sure you install the SP1 so as to have the USB 2.0
drivers.

Y.
 
first of all: 1.1 is built in computer as well as 2.0 high speed, but usually not all pc's have 2.0 built in, but if you don't have it. simple buy a pcmcia adapter and you're ready to use 2.0 high speed USB. "29 dollars
'
 
Huh?

Diaz said:
first of all: 1.1 is built in computer as well as 2.0 high speed, but
Click to expand...
usually not all pc's have 2.0 built in, but if you don't have it. simple buy
a pcmcia adapter and you're ready to use 2.0 high speed USB. "29 dollars"
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

question on USB 1.1 and 2.0 together 6
USB 2.0 Host Controller 2
Can I replace on-board USB 1.1 slots by a separate USB 2.0 -PCI card ? 10
[email protected] 1
USB 2.0 HDD EXTERNAL BOX 1
Converting USB 1.1 to USB 2.0 3
USB 2.0 devices connecting at 1.1 3
USB 2.0 device-hub problem 3

Back
Top