sqr said:
Change the Mobo, CPU and see if the machine will startup. Sometime you will
get lucky if you make a few moves like going back to the basic devices.
In Device manager remove all of the hardware you do not need eg. video,
lan,sound, modem cards, Monitor, mouse, usb controllers, secondary IDE
controllers, floppy controllers. You can dig deeper and remove some of the
system drivers to. If you have gone to far the system will stop that is all.
Upon reboot the drivers will reinstall to try again.
If all else fail a repair install must be perform but this will remove all
of you updates which must be reinstall later.
sqr,
It has been my experience and observation of others experience when changing
the mother board, if the swap is to the same MB, it is safe to boot directly
to Windows, but if the MB and CPU, chipset are different, it is like playing
Russian Roulette. If it is successful, great, you should not have any
problems, but if the system does not boot successfully on the first boot,
there is a great chance, it will never boot on the new MB. I always suggest
booting from the XP CD and performing a Repair Install on the first boot
after configuring the new hardware. It will necessitate applying all the
updates, Service Packs, etc. not included on the setup CD. The
alterternative if XP does not boot on the first boot is usually a clean
install because if it doesn't boot, it will usually not give an option to
Repair Install. I have seen some success in recovering by returning to the
original hardware configuration and then after rebuilding the option to
repair will again be an option.
Click on the link below, or copy and paste the link into the address box
if using the web based newsgroup.
Move XP to new hardware.
http://michaelstevenstech.com/moving_xp.html
--
Michael Stevens MS-MVP XP
(e-mail address removed)
http://michaelstevenstech.com
For a better newsgroup experience. Setup a newsreader.
http://michaelstevenstech.com/outlookexpressnewreader.htm