uninstall dual boot

[Guest]

i have windows 98se on one drive fat32 and havex.p. pro on
another in ntfs a dual boot configueration
but i cannot get the keyboard or mouse to work at all
i have tried reinstalling,useing ps2 and usb keyboards and mice
but nothing.
how can i uninstall x.p.pro completely and get back to as it was
before with just the 98se
experience--nil
my boot.ini looks like this if it is any help
[boot loader]
timeout=30
default=signature(f673f673)disk(1)rdisk(0)partition(1)\WINXP
[operating systems]
signature(f673f673)disk(1)rdisk(0)partition(1)\WINXP="Microsoft Windows XP
Professional" /fastdetect
C:\="Microsoft Windows"
many thanks in anticipation

 

[John John]

Are you refering to two separate hard disks? Are the files boot.ini,
ntldr and ntdetect.com on the Windows 98 FAT32 partition? If yes then
boot with your Windows 98 setup diskette and at the prompt issue:

SYS C:

Your computer should now boot directly to the Windows 98 installation.
You can safely delete the following files from the root folder:

Ntldr
Ntdetect.com
Boot.ini
Pagefile.sys (if present)
hiberfil.sys (if present)
Bootsect.dos

You can use appropriate tools to remove/recreate/reformat the NTFS
disk/partition.

http://support.microsoft.com/kb/171444

John

 

[peter]

The question is when does the mouse/Kb not work......98SE or XP
Pro????...........or both???

peter

 

[Guest]

Are you refering to two separate hard disks? Are the files boot.ini,
ntldr and ntdetect.com on the Windows 98 FAT32 partition? If yes then
boot with your Windows 98 setup diskette and at the prompt issue:

SYS C:

Your computer should now boot directly to the Windows 98 installation.
You can safely delete the following files from the root folder:

Ntldr
Ntdetect.com
Boot.ini
Pagefile.sys (if present)
hiberfil.sys (if present)
Bootsect.dos

You can use appropriate tools to remove/recreate/reformat the NTFS
disk/partition.

http://support.microsoft.com/kb/171444

John

i have windows 98se on one drive fat32 and havex.p. pro on
another in ntfs a dual boot configueration
but i cannot get the keyboard or mouse to work at all
i have tried reinstalling,useing ps2 and usb keyboards and mice
but nothing.
how can i uninstall x.p.pro completely and get back to as it was
before with just the 98se
experience--nil
my boot.ini looks like this if it is any help
[boot loader]
timeout=30
default=signature(f673f673)disk(1)rdisk(0)partition(1)\WINXP
[operating systems]
signature(f673f673)disk(1)rdisk(0)partition(1)\WINXP="Microsoft Windows XP
Professional" /fastdetect
C:\="Microsoft Windows"
many thanks in anticipation

the installation is of the xp is on a separate drive under an ntfs file system and the files you mention are under the 98 fat 32 partition but i only have the installation cd.so can i make a windows 98 disket as you suggest? even if i put the bios to open the cd rome drive first it boots straight into my normal windows screen

many thanks once again brunos

 

[John John]

:

Are you refering to two separate hard disks? Are the files boot.ini,
ntldr and ntdetect.com on the Windows 98 FAT32 partition? If yes then
boot with your Windows 98 setup diskette and at the prompt issue:

SYS C:

Your computer should now boot directly to the Windows 98 installation.
You can safely delete the following files from the root folder:

Ntldr
Ntdetect.com
Boot.ini
Pagefile.sys (if present)
hiberfil.sys (if present)
Bootsect.dos

You can use appropriate tools to remove/recreate/reformat the NTFS
disk/partition.

http://support.microsoft.com/kb/171444

John

brunos wrote:

i have windows 98se on one drive fat32 and havex.p. pro on
another in ntfs a dual boot configueration
but i cannot get the keyboard or mouse to work at all
i have tried reinstalling,useing ps2 and usb keyboards and mice
but nothing.
how can i uninstall x.p.pro completely and get back to as it was
before with just the 98se
experience--nil
my boot.ini looks like this if it is any help
[boot loader]
timeout=30
default=signature(f673f673)disk(1)rdisk(0)partition(1)\WINXP
[operating systems]
signature(f673f673)disk(1)rdisk(0)partition(1)\WINXP="Microsoft Windows XP
Professional" /fastdetect
C:\="Microsoft Windows"
many thanks in anticipation

the installation is of the xp is on a separate drive under an ntfs file system and the files you mention are under the 98 fat 32 partition but i only have the installation cd.so can i make a windows 98 disket as you suggest? even if i put the bios to open the cd rome drive first it boots straight into my normal windows screen

many thanks once again brunos

Go to Bootdisk.com and download a Windows 98 boot disk, or boot to your
Windows 88 installation and create a boot diskette from there.
http://search.microsoft.com/results...0=Search&FORM=QBME1&l=1&mkt=en-US&PageType=99

After you create the diskette go in the BIOS and set the computer to
boot to the diskette drive first then boot the computer with the
diskette in the drive.

John

 

[Guest]

john john
very many thanks for all your help,i have now got back to where i was and
everything is working o.k.

:

Are you refering to two separate hard disks? Are the files boot.ini,
ntldr and ntdetect.com on the Windows 98 FAT32 partition? If yes then
boot with your Windows 98 setup diskette and at the prompt issue:

SYS C:

Your computer should now boot directly to the Windows 98 installation.
You can safely delete the following files from the root folder:

Ntldr
Ntdetect.com
Boot.ini
Pagefile.sys (if present)
hiberfil.sys (if present)
Bootsect.dos

You can use appropriate tools to remove/recreate/reformat the NTFS
disk/partition.

http://support.microsoft.com/kb/171444

John

brunos wrote:


i have windows 98se on one drive fat32 and havex.p. pro on
another in ntfs a dual boot configueration
but i cannot get the keyboard or mouse to work at all
i have tried reinstalling,useing ps2 and usb keyboards and mice
but nothing.
how can i uninstall x.p.pro completely and get back to as it was
before with just the 98se
experience--nil
my boot.ini looks like this if it is any help
[boot loader]
timeout=30
default=signature(f673f673)disk(1)rdisk(0)partition(1)\WINXP
[operating systems]
signature(f673f673)disk(1)rdisk(0)partition(1)\WINXP="Microsoft Windows XP
Professional" /fastdetect
C:\="Microsoft Windows"
many thanks in anticipation

the installation is of the xp is on a separate drive under an ntfs file system and the files you mention are under the 98 fat 32 partition but i only have the installation cd.so can i make a windows 98 disket as you suggest? even if i put the bios to open the cd rome drive first it boots straight into my normal windows screen

many thanks once again brunos

Go to Bootdisk.com and download a Windows 98 boot disk, or boot to your
Windows 88 installation and create a boot diskette from there.
http://search.microsoft.com/results...0=Search&FORM=QBME1&l=1&mkt=en-US&PageType=99

After you create the diskette go in the BIOS and set the computer to
boot to the diskette drive first then boot the computer with the
diskette in the drive.

John

 

[John John]

You're welcome. Thanks for the follow up.

John

john john
very many thanks for all your help,i have now got back to where i was and
everything is working o.k.

:

brunos wrote:

:



Are you refering to two separate hard disks? Are the files boot.ini,
ntldr and ntdetect.com on the Windows 98 FAT32 partition? If yes then
boot with your Windows 98 setup diskette and at the prompt issue:

SYS C:

Your computer should now boot directly to the Windows 98 installation.
You can safely delete the following files from the root folder:

Ntldr
Ntdetect.com
Boot.ini
Pagefile.sys (if present)
hiberfil.sys (if present)
Bootsect.dos

You can use appropriate tools to remove/recreate/reformat the NTFS
disk/partition.

http://support.microsoft.com/kb/171444

John

brunos wrote:



i have windows 98se on one drive fat32 and havex.p. pro on
another in ntfs a dual boot configueration
but i cannot get the keyboard or mouse to work at all
i have tried reinstalling,useing ps2 and usb keyboards and mice
but nothing.
how can i uninstall x.p.pro completely and get back to as it was
before with just the 98se
experience--nil
my boot.ini looks like this if it is any help
[boot loader]
timeout=30
default=signature(f673f673)disk(1)rdisk(0)partition(1)\WINXP
[operating systems]
signature(f673f673)disk(1)rdisk(0)partition(1)\WINXP="Microsoft Windows XP
Professional" /fastdetect
C:\="Microsoft Windows"
many thanks in anticipation

the installation is of the xp is on a separate drive under an ntfs file system and the files you mention are under the 98 fat 32 partition but i only have the installation cd.so can i make a windows 98 disket as you suggest? even if i put the bios to open the cd rome drive first it boots straight into my normal windows screen

many thanks once again brunos

Go to Bootdisk.com and download a Windows 98 boot disk, or boot to your
Windows 88 installation and create a boot diskette from there.
http://search.microsoft.com/results...0=Search&FORM=QBME1&l=1&mkt=en-US&PageType=99

After you create the diskette go in the BIOS and set the computer to
boot to the diskette drive first then boot the computer with the
diskette in the drive.

John