L
LEVINE
When I attempt to access http://192.168.1.1" through my webserver, i get the
message: "cannot find server." What am I doing wrong?
message: "cannot find server." What am I doing wrong?
A
Angus
I'm guessing this is a network device on ur network... If
your going through a proxy server, disable it, or add it
to the bypass list (through tools - Internet Options - LAN
Settings) let me know if that works
...
Angus...
your going through a proxy server, disable it, or add it
to the bypass list (through tools - Internet Options - LAN
Settings) let me know if that works
...Angus...
G
Guest
proxy is uncheck, also have difficulty w/ https: sites.
Note that the netscape browser works fine, only ie6 has
these problems
Note that the netscape browser works fine, only ie6 has
these problems
A
Angus
I've had issues with this in the past... Are you running
an ISA Server or any other proxy/firewall on anyway on
your network at all?? All I did was loosen up the access
policy on the network...
an ISA Server or any other proxy/firewall on anyway on
your network at all?? All I did was loosen up the access
policy on the network...
G
Guest
Hi, wich port is your service using? Sometimes IE has problems connecting to
it if it's not the default port 80. Try to add the port number, for example:
http://192.168.1.1:88 (if the port is 88)
it if it's not the default port 80. Try to add the port number, for example:
http://192.168.1.1:88 (if the port is 88)
R
RRR_News
Levine,
Are you sure that you are using the right address, have you tried?
192.168.0.1 or 192.168.2.1
I changed the IP address on my router, from the default one. But when I updated the firmware, it went back to the company's default one. I had to change it back to what I wanted it be, so that I could use the router for Internet and LAN connections for my PC's.
--
Add MS to your News Reader: news://msnews.microsoft.com
Rich/rerat
(RRR News) <message rule>
<<Previous Text Snipped to Save Bandwidth When Appropriate>>
Hi, wich port is your service using? Sometimes IE has problems connecting to
it if it's not the default port 80. Try to add the port number, for example:
http://192.168.1.1:88 (if the port is 88)
Are you sure that you are using the right address, have you tried?
192.168.0.1 or 192.168.2.1
I changed the IP address on my router, from the default one. But when I updated the firmware, it went back to the company's default one. I had to change it back to what I wanted it be, so that I could use the router for Internet and LAN connections for my PC's.
--
Add MS to your News Reader: news://msnews.microsoft.com
Rich/rerat
(RRR News) <message rule>
<<Previous Text Snipped to Save Bandwidth When Appropriate>>
Hi, wich port is your service using? Sometimes IE has problems connecting to
it if it's not the default port 80. Try to add the port number, for example:
http://192.168.1.1:88 (if the port is 88)