Two NICs - preferred network for application possible?

[Guest]

Sharing telephony switchboard with another organization we have a switchboard
PC with two NICs, each of them connected to either of the organizations'
network.

Now - trying to make a connection from this PC with Citrix Program
Neighbourhood to the servers belonging to an accounting ASP serving our
organization - it seems like the PC automatically tries to use the other
organization's internet connection. The connect to the ASP fails, reporting
'no servers found' - probably because the ASP only reckognizes connects from
our network, not from the other organization's.

Same thing happens if we try to ping the actual servers from this PC. A
'tracert' command shows that the call travels by the other organization's
network.

Is there any way - using Windows XP or NIC settings - to direct this traffic
to use our own internet connection (not at the same time disabling the
necessary traffic to the other network)?

 

[Robert L. \(MS-MVP\)]

Sure, you may want to modify the routing table. This link may help.

RoutingNo internet access - Destination net unreachable One router goes to
the corporation email server and another one goes to the Internet ...
www.chicagotech.net/routing.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com

 

[Guest]

Internet access is determined by the Default Gateway setting. There should be
only one, pointing to your own network's router.