TWAIN BEING BLOCKED

  • Thread starter Robert E. Willis
  • Start date
R

Robert E. Willis

Hi,

Below is a complete copy of my twain.log file, after trying to aquire
pcitures from my Digital Camera, a Concord EYE-Q DUO LCD , useing Arcsoft's
Photoimpression 2000. WinXP PRO is blocking twain from starting! I
reinstalled the Camera drivers.....no luck. .......twain divers .........no
luck either ....HELP!!!

Thanks for any help,

RobertE. Willis




TWAIN_32.DLL - MESSAGE - CTwunk ::AppInitialize - Reset Log

TWAIN_32.DLL - MESSAGE - CTwunk ::OpenServer - Starting Thunker

TWAIN_32.DLL - MESSAGE - CTwunk ::CloseServer - Why Can't We Find The
Thunker Window?

TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC = 0)

TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to NULL:

TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, IDENTITY, GETFIRST

TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC = 0)

TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to NULL:

TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, IDENTITY, GETNEXT

TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 7, CC = 0)

TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to NULL:

TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, IDENTITY, GETDEFAULT

TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC = 0)

TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to NULL:

TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, PARENT, CLOSEDSM

TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC = FFFF)
 
C

Cari \(MS-MVP\)

Twain and WIA (Windows Image Acquisition) don't work too well together....
try going to the Control Panel, Admin Tools, Services... set WIA to
Manual... reboot the PC then try again.

Cari
www.coribright.com
 
Q

Quaoar

Robert said:
Hi,

Below is a complete copy of my twain.log file, after trying to aquire
pcitures from my Digital Camera, a Concord EYE-Q DUO LCD , useing
Arcsoft's Photoimpression 2000. WinXP PRO is blocking twain from
starting! I reinstalled the Camera drivers.....no luck. .......twain
divers .........no luck either ....HELP!!!

Thanks for any help,

RobertE. Willis




TWAIN_32.DLL - MESSAGE - CTwunk ::AppInitialize - Reset Log

TWAIN_32.DLL - MESSAGE - CTwunk ::OpenServer - Starting Thunker

TWAIN_32.DLL - MESSAGE - CTwunk ::CloseServer - Why Can't We Find The
Thunker Window?

TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC = 0)

TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to
NULL:

TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, IDENTITY, GETFIRST

TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC = 0)

TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to
NULL:

TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, IDENTITY, GETNEXT

TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 7, CC = 0)

TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to
NULL:

TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, IDENTITY, GETDEFAULT

TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC = 0)

TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to
NULL:

TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, PARENT, CLOSEDSM

TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC =
FFFF)
Click to expand...

If there is a scanner connected when this happens, the scanner TWAIN is
loaded and the Camera TWAIN cannot load.

Q
 
R

Robert E. Willis

Thanks Cari.......I disabled WIA, rebooted, checked thaf the service was
off.......no luck ......still won't work.....the aquire screen flashes by
real quick....just like before......ahhhh!
 
R

Robert E. Willis

Thanks Cari.......I disabled WIA, rebooted, checked that the service was
off.......no luck ......still won't work.....the aquire screen flashes by
real quick....just like before......ahhhh!
 
J

Jef Norton

Hi Robert -

Here's an interesting page to peruse with a bunch of support information
Q&A-style for your camera:
http://www.concord-camera.com/support/faq/addendum/addendum.htm

And another page detailing problems specific to the drivers and Windows XP:
http://www.concord-camera.com/support/faq/win_xp/win_xp.htm

And yet another dealing with issues regarding other issues:
http://www.concord-camera.com/support/faq/issues_resolution/issues_resolution.htm

From what I can tell looking at your camera's manual (available at
http://www.concord-camera.com/support/downloads/inst_manual/duo_lcd/inst_duo_lcd.htm )
, you may have the mode set improperly. There are two modes: PC Mode (which
appears to use the Twain driver) and Mass Storage Mode (or HDD Mode), which
will cause the camera to be accessed as if it were another storage device on
your computer (so you could open files from the camera in the same manner as
opening files on your hard disk).

I found all this stuff here:
http://www.concord-camera.com/support/faq/eyeq_duolcd/duolcd_support.htm

Have fun reading and hope this helps resolve your problems.

Jef


| Hi,
|
| Below is a complete copy of my twain.log file, after trying to aquire
| pcitures from my Digital Camera, a Concord EYE-Q DUO LCD , useing
Arcsoft's
| Photoimpression 2000. WinXP PRO is blocking twain from starting! I
| reinstalled the Camera drivers.....no luck. .......twain divers
..........no
| luck either ....HELP!!!
|
| Thanks for any help,
|
| RobertE. Willis
|
|
|
|
| TWAIN_32.DLL - MESSAGE - CTwunk ::AppInitialize - Reset Log
|
| TWAIN_32.DLL - MESSAGE - CTwunk ::OpenServer - Starting Thunker
|
| TWAIN_32.DLL - MESSAGE - CTwunk ::CloseServer - Why Can't We Find The
| Thunker Window?
|
| TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC = 0)
|
| TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to NULL:
|
| TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, IDENTITY, GETFIRST
|
| TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC = 0)
|
| TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to NULL:
|
| TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, IDENTITY, GETNEXT
|
| TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 7, CC = 0)
|
| TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to NULL:
|
| TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, IDENTITY, GETDEFAULT
|
| TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC = 0)
|
| TWAIN_32.DLL - MESSAGE - CTWTRACE--Arcsoft PhotoImpression(823) to NULL:
|
| TWAIN_32.DLL - MESSAGE - CTWTRACE--CONTROL, PARENT, CLOSEDSM
|
| TWAIN_32.DLL - MESSAGE - DSM --DsmEntryDiagExit (RC = 0, CC = FFFF)
|
|
|
 
R

Robert E. Willis

Thanks Jeff,

Been there...Done that!.....They mention an inconpatibilabity with the NEWER
Toshiba Tecera not importing to Photoimpessions, ALL the Windows functions
work correctly.....maybe my Toshiba Satellite should get added to list of
incompatible Laptops! (Mdl. 2805-301).
Thanks for ALL your help!

Robert E. Willis



Jef Norton said:
Hi Robert -

Here's an interesting page to peruse with a bunch of support information
Q&A-style for your camera:
http://www.concord-camera.com/support/faq/addendum/addendum.htm

And another page detailing problems specific to the drivers and Windows XP:
http://www.concord-camera.com/support/faq/win_xp/win_xp.htm

And yet another dealing with issues regarding other issues:
http://www.concord-camera.com/support/faq/issues_resolution/issues_resolution.htm

From what I can tell looking at your camera's manual (available at
Click to expand...
http://www.concord-camera.com/support/downloads/inst_manual/duo_lcd/inst_duo_lcd.htm )
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

TWAIN DRIVERS BEING BLOCKED 5
Twain Help 1
What is TWAIN? 4
Can't get my scanner to work! 1
Thunker cannot be found 7
Help! Explorer.exe crashing due to fault in shell32.dll. 9
HELP! Explorer.exe crashing because of shell32.dll! 16
WTD: Nvidia Videocard for 4x AGP Slot 0

Top