The attempt to send the fax failed. There was no answer. The service will at

  • Thread starter Thread starter Xenek Stoehr
  • Start date Start date
X

Xenek Stoehr

I have a new computer running a clean OEM copy of WinXP
home. When attempting to send faxes we are having
problems. We have tried sending using two modems to two
different fax numbers. Specifically, we can hear the
modem dial the number. The remote fax answers, and plays
its initialization whistiling noise. A single little
bleep is heard, and the modem goes on hook.

The event log has the following:

The attempt to send the fax failed. There was no answer.
The service will attempt to resend the fax. Sender:
Harleys Educational Supplies. Billing code: . Sender
company: Harleys Educational Supplies. Sender dept: .
Recipient name: Harleys Educational Supplies Accounts
Dept.. Recipient number: 0740533661. Device name: NetComm
Roadster 336 PnP ( AM3460 ).

The attempt to send the fax failed. There was no answer.
The service will attempt to resend the fax. Sender:
Harleys Educational Supplies. Billing code: . Sender
company: Harleys Educational Supplies. Sender dept: .
Recipient name: Harleys Educational Supplies Accounts
Dept.. Recipient number: 0740533661. Device name: Standard
33600 bps Modem.

The attempt to send the fax failed. There was no answer.
The service will attempt to resend the fax. Sender:
Harleys Educational Supplies. Billing code: . Sender
company: Harleys Educational Supplies. Sender dept: .
Recipient name: Harleys Educational Supplies Accounts
Dept.. Recipient number: 0740533661. Device name: Banksia
MyFastModem 336 PnP.

Here you can see the different modems tried. I also tried
the standard 336 driver with both modems with no success.

Both modems are known good. Both receiving faxes are
known good. This must be an XP problem. Is it possible
that it has something to do with the fact we are running
through a PABX? Note that the Windows 98 PC running
Microsoft Fax worked perfect using the Netcomm modem and
using the same phone line. Is it possibly because the
dialling properties aren't US based? We are in Australia.
Remember that we can hear the remote fax answer, and play
its initialization tone.

Here is the most recently tested modems log.

If there is no quick and obvious fix for this problem
please note as such as time is critical. ( I have already
tried to Google for solutions)

11-10-2003 13:26:55.796 - File: C:\WINDOWS\System32
\tapisrv.dll, Version 5.1.2600
11-10-2003 13:26:55.796 - File: C:\WINDOWS\System32
\unimdm.tsp, Version 5.1.2600
11-10-2003 13:26:55.796 - File: C:\WINDOWS\System32
\unimdmat.dll, Version 5.1.2600
11-10-2003 13:26:55.796 - File: C:\WINDOWS\System32
\uniplat.dll, Version 5.1.2600
11-10-2003 13:26:55.812 - File: C:\WINDOWS\System32
\drivers\modem.sys, Version 5.1.2600
11-10-2003 13:26:55.812 - File: C:\WINDOWS\System32
\modemui.dll, Version 5.1.2600
11-10-2003 13:26:55.812 - File: C:\WINDOWS\System32
\mdminst.dll, Version 5.1.2600
11-10-2003 13:26:55.812 - Modem type: Banksia MyFastModem
336 PnP
11-10-2003 13:26:55.812 - Modem inf path: oem6.inf
11-10-2003 13:26:55.812 - Modem inf section: 336ext
11-10-2003 13:26:55.812 - Matching hardware ID:
serenum\bnk4120
11-10-2003 13:26:55.812 - Opening Modem
11-10-2003 13:26:55.812 - 115200,8,N,1, ctsfl=1, rtsctl=2
11-10-2003 13:26:55.812 - Initializing modem.
11-10-2003 13:26:55.828 - Send: ATE1V1Q0<cr>
11-10-2003 13:26:55.828 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:26:55.828 - Interpreted response: OK
11-10-2003 13:26:55.843 - Send:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:26:55.843 - Recv:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:26:55.843 - Command Echo
11-10-2003 13:26:55.843 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:26:55.843 - Interpreted response: OK
11-10-2003 13:26:55.859 - Send: ATS7=60S30=0L1M1\N3%
C3&K3B0N1X3<cr>
11-10-2003 13:26:55.859 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:26:55.859 - Interpreted response: OK
11-10-2003 13:26:55.859 - Session Statistics:
11-10-2003 13:26:55.859 - Reads : 43 bytes
11-10-2003 13:26:55.859 - Writes: 66 bytes
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\tapisrv.dll, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\unimdm.tsp, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\unimdmat.dll, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\uniplat.dll, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\drivers\modem.sys, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\modemui.dll, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\mdminst.dll, Version 5.1.2600
11-10-2003 13:27:52.546 - Modem type: Banksia MyFastModem
336 PnP
11-10-2003 13:27:52.546 - Modem inf path: oem6.inf
11-10-2003 13:27:52.546 - Modem inf section: 336ext
11-10-2003 13:27:52.546 - Matching hardware ID:
serenum\bnk4120
11-10-2003 13:27:52.546 - Opening Modem
11-10-2003 13:27:52.546 - 115200,8,N,1, ctsfl=1, rtsctl=2
11-10-2003 13:27:52.546 - Initializing modem.
11-10-2003 13:27:52.546 - TSP(0000): Monitoring
11-10-2003 13:27:52.546 - TSP(0000): Monitoring
11-10-2003 13:27:52.562 - Send: ATE1V1Q0<cr>
11-10-2003 13:27:52.562 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:27:52.562 - Interpreted response: OK
11-10-2003 13:27:52.562 - TSP(0000): Making Call
11-10-2003 13:27:52.578 - Send:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:27:52.578 - Recv:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:27:52.578 - Command Echo
11-10-2003 13:27:52.578 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:27:52.578 - Interpreted response: OK
11-10-2003 13:27:52.593 - Send: ATS7=60S30=0L1M1\N3%
C3&K3B0N1X3<cr>
11-10-2003 13:27:52.593 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:27:52.593 - Interpreted response: OK
11-10-2003 13:27:52.593 - Waiting for a call.
11-10-2003 13:27:52.609 - Send: ATS0=0<cr>
11-10-2003 13:27:52.609 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:27:52.609 - Interpreted response: OK
11-10-2003 13:27:52.609 - Passthrough On
11-10-2003 13:27:52.609 - TSP Completing Async Operation
(0x000100ef) Status 0x00000000
11-10-2003 13:27:52.609 - TSP(0000): LINEEVENT:
LINECALLSTATE_CONNECTED
11-10-2003 13:28:23.843 - TSP(0000): Dropping Call
11-10-2003 13:28:23.843 - Passthrough Off
11-10-2003 13:28:23.843 - 115200,8,N,1, ctsfl=1, rtsctl=2
11-10-2003 13:28:23.843 - Initializing modem.
11-10-2003 13:28:23.859 - Send: ATE1V1Q0<cr>
11-10-2003 13:28:23.859 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:28:23.859 - Interpreted response: OK
11-10-2003 13:28:23.875 - Send:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:28:23.875 - Recv:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:28:23.875 - Command Echo
11-10-2003 13:28:23.875 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:28:23.875 - Interpreted response: OK
11-10-2003 13:28:23.890 - Send: ATS7=60S30=0L1M1\N3%
C3&K3B0N1X3<cr>
11-10-2003 13:28:23.890 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:28:23.890 - Interpreted response: OK
11-10-2003 13:28:23.890 - Waiting for a call.
11-10-2003 13:28:23.906 - Send: ATS0=0<cr>
11-10-2003 13:28:23.906 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:28:23.906 - Interpreted response: OK
11-10-2003 13:28:23.906 - TSP(0000): LINEEVENT:
LINECALLSTATE_DISCONNECTED(0x1)
11-10-2003 13:28:23.906 - TSP(0000): LINEEVENT:
LINECALLSTATE_IDLE
11-10-2003 13:28:23.906 - TSP Completing Async Operation
(0x000100cd) Status 0x00000000
11-10-2003 13:28:23.906 - TSP(0000): Closing Call
11-10-2003 13:28:23.906 - Session Statistics:
11-10-2003 13:28:23.906 - Reads : 49 bytes
11-10-2003 13:28:23.906 - Writes: 73 bytes
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\tapisrv.dll, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\unimdm.tsp, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\unimdmat.dll, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\uniplat.dll, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\drivers\modem.sys, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\modemui.dll, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\mdminst.dll, Version 5.1.2600
11-10-2003 13:29:23.921 - Modem type: Banksia MyFastModem
336 PnP
11-10-2003 13:29:23.921 - Modem inf path: oem6.inf
11-10-2003 13:29:23.921 - Modem inf section: 336ext
11-10-2003 13:29:23.921 - Matching hardware ID:
serenum\bnk4120
11-10-2003 13:29:23.921 - Opening Modem
11-10-2003 13:29:23.921 - 115200,8,N,1, ctsfl=1, rtsctl=2
11-10-2003 13:29:23.921 - Initializing modem.
11-10-2003 13:29:23.921 - TSP(0000): Monitoring
11-10-2003 13:29:23.921 - TSP(0000): Monitoring
11-10-2003 13:29:23.937 - Send: ATE1V1Q0<cr>
11-10-2003 13:29:23.937 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:23.937 - Interpreted response: OK
11-10-2003 13:29:23.937 - TSP(0000): Making Call
11-10-2003 13:29:23.953 - Send:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:29:23.953 - Recv:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:29:23.953 - Command Echo
11-10-2003 13:29:23.953 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:23.953 - Interpreted response: OK
11-10-2003 13:29:23.968 - Send: ATS7=60S30=0L1M1\N3%
C3&K3B0N1X3<cr>
11-10-2003 13:29:23.968 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:23.968 - Interpreted response: OK
11-10-2003 13:29:23.968 - Waiting for a call.
11-10-2003 13:29:23.984 - Send: ATS0=0<cr>
11-10-2003 13:29:23.984 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:23.984 - Interpreted response: OK
11-10-2003 13:29:23.984 - Passthrough On
11-10-2003 13:29:23.984 - TSP Completing Async Operation
(0x00010045) Status 0x00000000
11-10-2003 13:29:23.984 - TSP(0000): LINEEVENT:
LINECALLSTATE_CONNECTED
11-10-2003 13:29:48.859 - TSP(0000): Dropping Call
11-10-2003 13:29:48.859 - Passthrough Off
11-10-2003 13:29:48.859 - 115200,8,N,1, ctsfl=1, rtsctl=2
11-10-2003 13:29:48.859 - Initializing modem.
11-10-2003 13:29:48.875 - Send: ATE1V1Q0<cr>
11-10-2003 13:29:48.875 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:48.875 - Interpreted response: OK
11-10-2003 13:29:48.890 - Send:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:29:48.890 - Recv:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:29:48.890 - Command Echo
11-10-2003 13:29:48.890 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:48.890 - Interpreted response: OK
11-10-2003 13:29:48.906 - Send: ATS7=60S30=0L1M1\N3%
C3&K3B0N1X3<cr>
11-10-2003 13:29:48.906 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:48.906 - Interpreted response: OK
11-10-2003 13:29:48.906 - Waiting for a call.
11-10-2003 13:29:48.921 - Send: ATS0=0<cr>
11-10-2003 13:29:48.921 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:48.921 - Interpreted response: OK
11-10-2003 13:29:48.921 - TSP(0000): LINEEVENT:
LINECALLSTATE_DISCONNECTED(0x1)
11-10-2003 13:29:48.921 - TSP(0000): LINEEVENT:
LINECALLSTATE_IDLE
11-10-2003 13:29:48.921 - TSP Completing Async Operation
(0x00010012) Status 0x00000000
11-10-2003 13:29:48.921 - TSP(0000): Closing Call
11-10-2003 13:29:48.921 - Session Statistics:
11-10-2003 13:29:48.921 - Reads : 49 bytes
11-10-2003 13:29:48.921 - Writes: 73 bytes
 
What do you mean "both modems are known good?"
Unfortunately, Windows XP Fax has proven to be incompatible with many common
modems and drivers, particularly older ones, even if the manufacturers claim
they are "compatible" with Windows XP. Modem incompatibility is not apparent
during installation or the initial setup. It only becomes apparent when you
first try to send or receive a fax. The Fax Service will dial or will answer
an incoming fax but then fail with any of a number of unhelpful error
messages such as "Line is busy," "There is no answer," or "Reception error."
There will be nothing in Event Viewer to give a clue as to where the problem
might lie.

These errors have been nearly impossible to track down. To do so requires
enabling both PSS and debug logging of fax transmissions, both of which
require fairly extensive registry changes. For the time being, the best
advice is to attempt to use XP Fax only if you have a modem that is listed
on the Windows XP Hardware Compatibility List and using the latest drivers.
 
Hi Russ. By known good I mean both modems sucesfully send
faxes with different applications and under operating
systems such as 95 and 98, and both modems can connect to
the internet. Nonetheless your post has clarified where
the problem is likely to be and I will try a few more
modems for good measure. ;-) Thanks for taking the time
to respond. Regards Xenek Stoehr
-----Original Message-----
What do you mean "both modems are known good?"
Unfortunately, Windows XP Fax has proven to be incompatible with many common
modems and drivers, particularly older ones, even if the manufacturers claim
they are "compatible" with Windows XP. Modem
Click to expand...
incompatibility is not apparent
during installation or the initial setup. It only becomes apparent when you
first try to send or receive a fax. The Fax Service will dial or will answer
an incoming fax but then fail with any of a number of unhelpful error
messages such as "Line is busy," "There is no answer," or "Reception error."
There will be nothing in Event Viewer to give a clue as to where the problem
might lie.

These errors have been nearly impossible to track down. To do so requires
enabling both PSS and debug logging of fax transmissions, both of which
require fairly extensive registry changes. For the time being, the best
advice is to attempt to use XP Fax only if you have a modem that is listed
on the Windows XP Hardware Compatibility List and using the latest drivers.


--
Russ Valentine
[MVP-Outlook]
I have a new computer running a clean OEM copy of WinXP
home. When attempting to send faxes we are having
problems. We have tried sending using two modems to two
different fax numbers. Specifically, we can hear the
modem dial the number. The remote fax answers, and plays
its initialization whistiling noise. A single little
bleep is heard, and the modem goes on hook.

The event log has the following:

The attempt to send the fax failed. There was no answer.
The service will attempt to resend the fax. Sender:
Harleys Educational Supplies. Billing code: . Sender
company: Harleys Educational Supplies. Sender dept: .
Recipient name: Harleys Educational Supplies Accounts
Dept.. Recipient number: 0740533661. Device name: NetComm
Roadster 336 PnP ( AM3460 ).

The attempt to send the fax failed. There was no answer.
The service will attempt to resend the fax. Sender:
Harleys Educational Supplies. Billing code: . Sender
company: Harleys Educational Supplies. Sender dept: .
Recipient name: Harleys Educational Supplies Accounts
Dept.. Recipient number: 0740533661. Device name: Standard
33600 bps Modem.

The attempt to send the fax failed. There was no answer.
The service will attempt to resend the fax. Sender:
Harleys Educational Supplies. Billing code: . Sender
company: Harleys Educational Supplies. Sender dept: .
Recipient name: Harleys Educational Supplies Accounts
Dept.. Recipient number: 0740533661. Device name: Banksia
MyFastModem 336 PnP.

Here you can see the different modems tried. I also tried
the standard 336 driver with both modems with no success.

Both modems are known good. Both receiving faxes are
known good. This must be an XP problem. Is it possible
that it has something to do with the fact we are running
through a PABX? Note that the Windows 98 PC running
Microsoft Fax worked perfect using the Netcomm modem and
using the same phone line. Is it possibly because the
dialling properties aren't US based? We are in Australia.
Remember that we can hear the remote fax answer, and play
its initialization tone.

Here is the most recently tested modems log.

If there is no quick and obvious fix for this problem
please note as such as time is critical. ( I have already
tried to Google for solutions)

11-10-2003 13:26:55.796 - File: C:\WINDOWS\System32
\tapisrv.dll, Version 5.1.2600
11-10-2003 13:26:55.796 - File: C:\WINDOWS\System32
\unimdm.tsp, Version 5.1.2600
11-10-2003 13:26:55.796 - File: C:\WINDOWS\System32
\unimdmat.dll, Version 5.1.2600
11-10-2003 13:26:55.796 - File: C:\WINDOWS\System32
\uniplat.dll, Version 5.1.2600
11-10-2003 13:26:55.812 - File: C:\WINDOWS\System32
\drivers\modem.sys, Version 5.1.2600
11-10-2003 13:26:55.812 - File: C:\WINDOWS\System32
\modemui.dll, Version 5.1.2600
11-10-2003 13:26:55.812 - File: C:\WINDOWS\System32
\mdminst.dll, Version 5.1.2600
11-10-2003 13:26:55.812 - Modem type: Banksia MyFastModem
336 PnP
11-10-2003 13:26:55.812 - Modem inf path: oem6.inf
11-10-2003 13:26:55.812 - Modem inf section: 336ext
11-10-2003 13:26:55.812 - Matching hardware ID:
serenum\bnk4120
11-10-2003 13:26:55.812 - Opening Modem
11-10-2003 13:26:55.812 - 115200,8,N,1, ctsfl=1, rtsctl=2
11-10-2003 13:26:55.812 - Initializing modem.
11-10-2003 13:26:55.828 - Send: ATE1V1Q0<cr>
11-10-2003 13:26:55.828 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:26:55.828 - Interpreted response: OK
11-10-2003 13:26:55.843 - Send:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:26:55.843 - Recv:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:26:55.843 - Command Echo
11-10-2003 13:26:55.843 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:26:55.843 - Interpreted response: OK
11-10-2003 13:26:55.859 - Send: ATS7=60S30=0L1M1\N3%
C3&K3B0N1X3<cr>
11-10-2003 13:26:55.859 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:26:55.859 - Interpreted response: OK
11-10-2003 13:26:55.859 - Session Statistics:
11-10-2003 13:26:55.859 - Reads : 43 bytes
11-10-2003 13:26:55.859 - Writes: 66 bytes
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\tapisrv.dll, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\unimdm.tsp, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\unimdmat.dll, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\uniplat.dll, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\drivers\modem.sys, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\modemui.dll, Version 5.1.2600
11-10-2003 13:27:52.546 - File: C:\WINDOWS\System32
\mdminst.dll, Version 5.1.2600
11-10-2003 13:27:52.546 - Modem type: Banksia MyFastModem
336 PnP
11-10-2003 13:27:52.546 - Modem inf path: oem6.inf
11-10-2003 13:27:52.546 - Modem inf section: 336ext
11-10-2003 13:27:52.546 - Matching hardware ID:
serenum\bnk4120
11-10-2003 13:27:52.546 - Opening Modem
11-10-2003 13:27:52.546 - 115200,8,N,1, ctsfl=1, rtsctl=2
11-10-2003 13:27:52.546 - Initializing modem.
11-10-2003 13:27:52.546 - TSP(0000): Monitoring
11-10-2003 13:27:52.546 - TSP(0000): Monitoring
11-10-2003 13:27:52.562 - Send: ATE1V1Q0<cr>
11-10-2003 13:27:52.562 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:27:52.562 - Interpreted response: OK
11-10-2003 13:27:52.562 - TSP(0000): Making Call
11-10-2003 13:27:52.578 - Send:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:27:52.578 - Recv:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:27:52.578 - Command Echo
11-10-2003 13:27:52.578 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:27:52.578 - Interpreted response: OK
11-10-2003 13:27:52.593 - Send: ATS7=60S30=0L1M1\N3%
C3&K3B0N1X3<cr>
11-10-2003 13:27:52.593 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:27:52.593 - Interpreted response: OK
11-10-2003 13:27:52.593 - Waiting for a call.
11-10-2003 13:27:52.609 - Send: ATS0=0<cr>
11-10-2003 13:27:52.609 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:27:52.609 - Interpreted response: OK
11-10-2003 13:27:52.609 - Passthrough On
11-10-2003 13:27:52.609 - TSP Completing Async Operation
(0x000100ef) Status 0x00000000
11-10-2003 13:27:52.609 - TSP(0000): LINEEVENT:
LINECALLSTATE_CONNECTED
11-10-2003 13:28:23.843 - TSP(0000): Dropping Call
11-10-2003 13:28:23.843 - Passthrough Off
11-10-2003 13:28:23.843 - 115200,8,N,1, ctsfl=1, rtsctl=2
11-10-2003 13:28:23.843 - Initializing modem.
11-10-2003 13:28:23.859 - Send: ATE1V1Q0<cr>
11-10-2003 13:28:23.859 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:28:23.859 - Interpreted response: OK
11-10-2003 13:28:23.875 - Send:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:28:23.875 - Recv:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:28:23.875 - Command Echo
11-10-2003 13:28:23.875 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:28:23.875 - Interpreted response: OK
11-10-2003 13:28:23.890 - Send: ATS7=60S30=0L1M1\N3%
C3&K3B0N1X3<cr>
11-10-2003 13:28:23.890 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:28:23.890 - Interpreted response: OK
11-10-2003 13:28:23.890 - Waiting for a call.
11-10-2003 13:28:23.906 - Send: ATS0=0<cr>
11-10-2003 13:28:23.906 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:28:23.906 - Interpreted response: OK
11-10-2003 13:28:23.906 - TSP(0000): LINEEVENT:
LINECALLSTATE_DISCONNECTED(0x1)
11-10-2003 13:28:23.906 - TSP(0000): LINEEVENT:
LINECALLSTATE_IDLE
11-10-2003 13:28:23.906 - TSP Completing Async Operation
(0x000100cd) Status 0x00000000
11-10-2003 13:28:23.906 - TSP(0000): Closing Call
11-10-2003 13:28:23.906 - Session Statistics:
11-10-2003 13:28:23.906 - Reads : 49 bytes
11-10-2003 13:28:23.906 - Writes: 73 bytes
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\tapisrv.dll, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\unimdm.tsp, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\unimdmat.dll, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\uniplat.dll, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\drivers\modem.sys, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\modemui.dll, Version 5.1.2600
11-10-2003 13:29:23.921 - File: C:\WINDOWS\System32
\mdminst.dll, Version 5.1.2600
11-10-2003 13:29:23.921 - Modem type: Banksia MyFastModem
336 PnP
11-10-2003 13:29:23.921 - Modem inf path: oem6.inf
11-10-2003 13:29:23.921 - Modem inf section: 336ext
11-10-2003 13:29:23.921 - Matching hardware ID:
serenum\bnk4120
11-10-2003 13:29:23.921 - Opening Modem
11-10-2003 13:29:23.921 - 115200,8,N,1, ctsfl=1, rtsctl=2
11-10-2003 13:29:23.921 - Initializing modem.
11-10-2003 13:29:23.921 - TSP(0000): Monitoring
11-10-2003 13:29:23.921 - TSP(0000): Monitoring
11-10-2003 13:29:23.937 - Send: ATE1V1Q0<cr>
11-10-2003 13:29:23.937 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:23.937 - Interpreted response: OK
11-10-2003 13:29:23.937 - TSP(0000): Making Call
11-10-2003 13:29:23.953 - Send:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:29:23.953 - Recv:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:29:23.953 - Command Echo
11-10-2003 13:29:23.953 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:23.953 - Interpreted response: OK
11-10-2003 13:29:23.968 - Send: ATS7=60S30=0L1M1\N3%
C3&K3B0N1X3<cr>
11-10-2003 13:29:23.968 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:23.968 - Interpreted response: OK
11-10-2003 13:29:23.968 - Waiting for a call.
11-10-2003 13:29:23.984 - Send: ATS0=0<cr>
11-10-2003 13:29:23.984 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:23.984 - Interpreted response: OK
11-10-2003 13:29:23.984 - Passthrough On
11-10-2003 13:29:23.984 - TSP Completing Async Operation
(0x00010045) Status 0x00000000
11-10-2003 13:29:23.984 - TSP(0000): LINEEVENT:
LINECALLSTATE_CONNECTED
11-10-2003 13:29:48.859 - TSP(0000): Dropping Call
11-10-2003 13:29:48.859 - Passthrough Off
11-10-2003 13:29:48.859 - 115200,8,N,1, ctsfl=1, rtsctl=2
11-10-2003 13:29:48.859 - Initializing modem.
11-10-2003 13:29:48.875 - Send: ATE1V1Q0<cr>
11-10-2003 13:29:48.875 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:48.875 - Interpreted response: OK
11-10-2003 13:29:48.890 - Send:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:29:48.890 - Recv:
AT&F&C1&D2W2S95=47E0S0=0<cr>
11-10-2003 13:29:48.890 - Command Echo
11-10-2003 13:29:48.890 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:48.890 - Interpreted response: OK
11-10-2003 13:29:48.906 - Send: ATS7=60S30=0L1M1\N3%
C3&K3B0N1X3<cr>
11-10-2003 13:29:48.906 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:48.906 - Interpreted response: OK
11-10-2003 13:29:48.906 - Waiting for a call.
11-10-2003 13:29:48.921 - Send: ATS0=0<cr>
11-10-2003 13:29:48.921 - Recv: <cr><lf>OK<cr><lf>
11-10-2003 13:29:48.921 - Interpreted response: OK
11-10-2003 13:29:48.921 - TSP(0000): LINEEVENT:
LINECALLSTATE_DISCONNECTED(0x1)
11-10-2003 13:29:48.921 - TSP(0000): LINEEVENT:
LINECALLSTATE_IDLE
11-10-2003 13:29:48.921 - TSP Completing Async Operation
(0x00010012) Status 0x00000000
11-10-2003 13:29:48.921 - TSP(0000): Closing Call
11-10-2003 13:29:48.921 - Session Statistics:
11-10-2003 13:29:48.921 - Reads : 49 bytes
11-10-2003 13:29:48.921 - Writes: 73 bytes
Click to expand...


.
Click to expand...
 
Back
Top