Swapping dhcp range

[Paul K]

i had a win2k sp4 dhcp server on 192.168.10.1. Its was set
up to dish out addresses on this range succesfully. I have
recently created a new range\scope on this server -
194.227.11.0. I have changed the ip address of dhcp server
to 194.227.11.1. I have de-activated the 192.168.10.0
scope. I have activated the 194.227.11.0 scope, yet still
the clients refuse to pick the new address. Tried
ipconfig /renew - says dhcp server can't be found. Also
tried reebooting clients to no avail. Help.

 

[Phillip Windell]

Why are you moving from a RFC Private IP Range to a Public ISP Assigned IP
Range?

You may have to remove (uninstall) the DHCP Service from the machine, then
reinstall it.

 

[Richard G. Harper]

Have you tried using IPCONFIG /RELEASE prior to IPCONFIG /RENEW?

--
Richard G. Harper [MVP Win9x] (e-mail address removed)
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* My website, such as it is ... http://rgharper.mvps.org/
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm

 

[Guest]

These ip address are being used in a test environment and
are totally internal. It's not the first time i've heard
that i might have to unistall dhcp and re-install, how
rubbish is that!!!!!.

-----Original Message-----
Why are you moving from a RFC Private IP Range to a Public ISP Assigned IP
Range?

You may have to remove (uninstall) the DHCP Service from the machine, then
reinstall it.

--

Phillip Windell [MCP, MVP, CCNA]
www.wandtv.com

i had a win2k sp4 dhcp server on 192.168.10.1. Its was set
up to dish out addresses on this range succesfully. I have
recently created a new range\scope on this server -
194.227.11.0. I have changed the ip address of dhcp server
to 194.227.11.1. I have de-activated the 192.168.10.0
scope. I have activated the 194.227.11.0 scope, yet still
the clients refuse to pick the new address. Tried
ipconfig /renew - says dhcp server can't be found. Also
tried reebooting clients to no avail. Help.

.

 

[Guest]

yes, i've also tried re-booting clients numerous times.

-----Original Message-----
Have you tried using IPCONFIG /RELEASE prior to IPCONFIG /RENEW?

--
Richard G. Harper [MVP Win9x] (e-mail address removed)
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* My website, such as it is ... http://rgharper.mvps.org/
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm

i had a win2k sp4 dhcp server on 192.168.10.1. Its was set
up to dish out addresses on this range succesfully. I have
recently created a new range\scope on this server -
194.227.11.0. I have changed the ip address of dhcp server
to 194.227.11.1. I have de-activated the 192.168.10.0
scope. I have activated the 194.227.11.0 scope, yet still
the clients refuse to pick the new address. Tried
ipconfig /renew - says dhcp server can't be found. Also
tried reebooting clients to no avail. Help.

.

 

[Phillip Windell]

These ip address are being used in a test environment and
are totally internal. It's not the first time i've heard
that i might have to unistall dhcp and re-install, how
rubbish is that!!!!!.

....and if you listened the first time you might be working by now...

.....whatever...