Strange Startup Slow Networking Behavior

D

Daniel Bullington

I am recently experiencing a strange problem during startup on my system. If
I startup the machine, everything is well up until I encounter the login
screen. I then enter my username and password. Login begins and Windows
Explorer loads relatively fast. The problem is that it takes upwards of two
to three minutes for the networking subsystem to become "active" for certain
applications. During this time, I can ping, telnet, and ftp into remote
hosts using command line tools. Applications such as Word 2003, Word Pad,
and Note Pad are not affected. HOWEVER, applications such as Internet
Explorer, MMC, MS Paint, Network Properties, Windows Live Messenger, AOL
Instant Messenger, MS Config, and IIS will hang and not respond until the
issue corrects itself. The machine cannot be pinged successfully from
another remote host during the problem as well. Another extremely odd
symptom of the problem is that Task Manager does not show the user identity
of running processes until the problem has corrected itself. The problem
occurred in safe mode with networking as well.



I have performed the following tests to determine a root cause:



Antivirus scan was clean. A root kit scan was clean. No spy ware was
evident. All Windows updates are installed. The latest drivers are
installed. Ran netstat 1 -a during problem; no rogue connections detected.
Created a new admin account, no change in problem. Ran sfc /scannow; no
issues were reported. Ran netdiag /test:*; all passed. I have disabled all
non essential services and no change.





I am wondering if there is a service or driver deadlock, DCOM
issues.something outside what I have already tried.



At this point, I have no clue what could cause this problem. Otherwise the
computer runs great. Any advice would be greatly appreciated.





D. Bullington
 
T

thecreator

Hi Daniel,

What version of XP are you running? Go into Services.
Make sure that Plug and Play Startup Type is set to Manual.
Make sure that SSDP Discovery Service is set to Manual.
Make sure that Universal Plug and Play Device Host is set to Automatic. If
not change them. Click Apply then OK.
Reboot the computer.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top