STOP ERROR INACCESSIBLE_BOOT_DEVICE

  • Thread starter Thread starter Bruce
  • Start date Start date
B

Bruce

We install PowerQuest Volume Manager. And here we are. We
change one volume size. We have tried several ways of
getting the server to boot no luck. Its a Compaq in a Raid
5 config. Any ideas?
 
Run a diagnostic on the Drives in the array, sounds like
one or more are damaged.... Is your raid array working
properly?
 
I have seen this a few times with their filter driver. If you can get into
the drives from another machine, disable that filter and you should be able
to boot the machine normally.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

INACCESSIBLE_BOOT_DEVICE STOP ERROR 2
PowerQuest VolumeManger 2
Convert from Basic to Dynamic Disks to increase partition sizes? 1
Smartstart 7.30 add disk to array and make it raid 0,1 2
Restoring from an old server to a new server - HELP 1
Win 2000 advanced server 3
Striped Dynamic volumes becoming Invalid 2
Windows 10 Insufficient disk space to fix volume bitmap. 5

Back
Top