SP1 event errors

D

dev

Runs OK, but generates two previously unseen errors each boot (in pairs)...
-0-
Kernel-Processor-Power ID 6 SYSTEM
Some processor power management features have been disabled due to a
known firmware problem. Check with the computer manufacturer for
updated firmware.

HttpEvent ID 15016 SYSTEM
Unable to initialize the security package Kerberos for server side
authentication. The data field contains the error number.
-0-
I have researched both, and see nothing that precisely matches ID 6.
ID 15016 is discussed, but with no resolution.

The errors likely can be ignored, but knowledgeable comments would be
appreciated.
 
K

kevpan815

Was This Update Using Windows Update Or Microsoft Download Center? As
Previously Mentioned By Microsoft, Some Hardware Device Driver's Have Been
Known 2 Cause Problems With SP1 Installation. Your Best Bet Is Not 2 Try 2
Force SP1 Installation From http://www.microsoft.com/downloads, As I Have
Found That All Download's There Have Slowed Down 2 A Crawl. Use MSDN
Subscriber Downloads (If You Have A MSDN Subscription With Microsoft, As I
Notice That You Are Calling Yourself A Developer), Or Wait Until April 18th,
2008, When Microsoft Begins Pushing SP1 Through Automatic Updates, Just FYI.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

security package 'kerberos' not starting for server side - what? 1
After SP1 Install/Event error/Kerberos 10
Random Crashes 1
Windows networking just cut out one night... 1
Errors- HTTP, Terminal Services, TBS, DPS, UAC, Code Integrity, WM 3
windows shuts down unexpectedly 15
processor power management features have been disabled due to a known firmware error EVENT ID 6 1
After SP1, not dead but not healthy either - ideas? 2

Top