SP 3 Component Question

G

Garnet

I can't complete my installation of SP 3 because my software firewall (Online
Armor) stops it at a component that is named "Apartment" It asks me if I
want it to proceed. However when I get my firewall popup a Windows "access
denied" popup also appears that stops the complete installation of SP 3
because when I click the "OK" in the Windows notification, it reverses
everything that had been done to that point.

I plan on disabling the firewall the next time I try to install SP 3 but
just wanted to run that component name (Apartment) by everyone here. It
seemed an incredibly "untechnical" term for an OS component.
 
S

Shenan Stanley

Garnet said:
I can't complete my installation of SP 3 because my software
firewall (Online Armor) stops it at a component that is named
"Apartment" It asks me if I want it to proceed. However when I get
my firewall popup a Windows "access denied" popup also appears that
stops the complete installation of SP 3 because when I click the
"OK" in the Windows notification, it reverses everything that had
been done to that point.

I plan on disabling the firewall the next time I try to install SP
3 but just wanted to run that component name (Apartment) by
everyone here. It seemed an incredibly "untechnical" term for an OS
component.

You mean like "Windows"?
*grin*
 
G

Garnet

Ok, point taken on the component name. And pardon me if I missed something in
your response unless you were sarcastically suggesting all was well.

I want to know why my firewall stopped at that specific point after the
update installed almost halfway. I guess "Apartment" is just part of the
install, right?
 
S

Shenan Stanley

<snip>
Ok, point taken on the component name. And pardon me if I missed
something in your response unless you were sarcastically suggesting
all was well.

I want to know why my firewall stopped at that specific point after
the update installed almost halfway. I guess "Apartment" is just
part of the install, right?

No idea. I am not familar with "Online Armor" nor do I know every component
of Windows XP SP3 by name. With 1174+ things being updated - it is probable
that what you say was a part of the install doing something your firewall
software was unfamilar with (wary of.)

Your best bet is to download/install the full IT version - offline
completely - disconnect from the internet after downloading the full file
and install completely off the Internet/local area network. No firewall or
AV software actively running while you do it.

Read over this first.

A place to get FREE support for SP3 installation issues *from Microsoft*...
http://support.microsoft.com/oas/default.aspx?ln=en-us&prid=11273&gprid=522131

Windows XP Service Pack 3 - ISO-9660 CD Image File
http://www.microsoft.com/downloads/...ce-b5fb-4488-8c50-fe22559d164e&DisplayLang=en

Windows XP Service Pack 3 Network Installation Package for IT Professionals
and Developers
http://www.microsoft.com/downloads/...A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

WinXP SP3 - Read all prerequisites for a successful installation
http://msmvps.com/blogs/harrywaldro...requisites-for-a-successful-installation.aspx

Steps to take before you install Windows XP Service Pack 3
http://support.microsoft.com/kb/950717

Release Notes for Windows XP Service Pack 3
http://download.microsoft.com/download/c/d/8/cd8cc719-7d5a-40d3-a802-e4057aa8c631/relnotes.htm

Key things to note:

Internet Explorer:
"If you have installed Windows Internet Explorer® 7 or a beta version of
Internet Explorer 8, and then install Windows XP SP3, you cannot uninstall
Internet Explorer. To avoid this, ensure Internet Explorer 7 or a beta
version of Internet Explorer 8 is not installed before installing Windows XP
SP3. If you have already encountered this issue, uninstall Windows XP SP3,
uninstall Internet Explorer, and then reinstall Windows XP SP3."

Windows XP Media Center Edition 2002:
"If you install Windows XP SP3 on a computer running Windows XP Media Center
Edition 2002 with SP1, Windows XP Media Center Edition may malfunction. To
avoid this, install Windows XP SP2 before you install Windows XP SP3. If
this issue has already occurred, uninstall Windows XP SP3, install Windows
XP SP2, and then reinstall Windows XP SP3."

It seems some people are unable to get further updates after installing
SP3... Seems some have experienced a symptom similar to doing a repair
installation on Windows XP - and the same fix seems to work for them for
that...

Updates are not installed successfully from Windows Update, from Microsoft
Update, or by using Automatic Updates after you repair a Windows XP
installation
http://support.microsoft.com/kb/943144

Some people experience an "endless reboot" issue...

From PA Bear [MS MVP]:
Workarounds:

http://msinfluentials.com/blogs/jes...ed-computer-boot-after-installing-xp-sp3.aspx
[NB: The above has been updated many times and now includes "a small tool
that will detect the IntelPPM problem and mitigate it before installing
[WinXP SP3]."

1. Boot into Safe Mode and rename INTELPMM.SYS to INTELPMM.OLD.
2. After booting into Safe Mode:
Start --> Run --> (copy/paste)
sc config intelppm start= disabled
--> OK --> Reboot into normal (Windows) mode.

Other references include:
.. http://aumha.net/viewtopic.php?p=187790#p187790
..
http://msinfluentials.com/blogs/jes...ed-computer-boot-after-installing-xp-sp3.aspx
.. http://www.theregister.co.uk/2008/05/09/windows_xp_sp3_reboots_crashes/
..
http://www.computerworld.com/action/article.do?command=viewArticleBasic&articleId=9084418
.. You receive a "Stop 0x0000007E" error message after you upgrade to Windows
XP Service Pack 2 or Service Pack 3 on a non-Intel-processor-based computer
(Revised 06 May-08)
http://support.microsoft.com/kb/888372
 
G

Garnet

Thanks. I'll check it out and come back if I can't continue with the install.

Shenan Stanley said:
<snip>
Ok, point taken on the component name. And pardon me if I missed
something in your response unless you were sarcastically suggesting
all was well.

I want to know why my firewall stopped at that specific point after
the update installed almost halfway. I guess "Apartment" is just
part of the install, right?

No idea. I am not familar with "Online Armor" nor do I know every component
of Windows XP SP3 by name. With 1174+ things being updated - it is probable
that what you say was a part of the install doing something your firewall
software was unfamilar with (wary of.)

Your best bet is to download/install the full IT version - offline
completely - disconnect from the internet after downloading the full file
and install completely off the Internet/local area network. No firewall or
AV software actively running while you do it.

Read over this first.

A place to get FREE support for SP3 installation issues *from Microsoft*...
http://support.microsoft.com/oas/default.aspx?ln=en-us&prid=11273&gprid=522131

Windows XP Service Pack 3 - ISO-9660 CD Image File
http://www.microsoft.com/downloads/...ce-b5fb-4488-8c50-fe22559d164e&DisplayLang=en

Windows XP Service Pack 3 Network Installation Package for IT Professionals
and Developers
http://www.microsoft.com/downloads/...A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

WinXP SP3 - Read all prerequisites for a successful installation
http://msmvps.com/blogs/harrywaldro...requisites-for-a-successful-installation.aspx

Steps to take before you install Windows XP Service Pack 3
http://support.microsoft.com/kb/950717

Release Notes for Windows XP Service Pack 3
http://download.microsoft.com/download/c/d/8/cd8cc719-7d5a-40d3-a802-e4057aa8c631/relnotes.htm

Key things to note:

Internet Explorer:
"If you have installed Windows Internet Explorer® 7 or a beta version of
Internet Explorer 8, and then install Windows XP SP3, you cannot uninstall
Internet Explorer. To avoid this, ensure Internet Explorer 7 or a beta
version of Internet Explorer 8 is not installed before installing Windows XP
SP3. If you have already encountered this issue, uninstall Windows XP SP3,
uninstall Internet Explorer, and then reinstall Windows XP SP3."

Windows XP Media Center Edition 2002:
"If you install Windows XP SP3 on a computer running Windows XP Media Center
Edition 2002 with SP1, Windows XP Media Center Edition may malfunction. To
avoid this, install Windows XP SP2 before you install Windows XP SP3. If
this issue has already occurred, uninstall Windows XP SP3, install Windows
XP SP2, and then reinstall Windows XP SP3."

It seems some people are unable to get further updates after installing
SP3... Seems some have experienced a symptom similar to doing a repair
installation on Windows XP - and the same fix seems to work for them for
that...

Updates are not installed successfully from Windows Update, from Microsoft
Update, or by using Automatic Updates after you repair a Windows XP
installation
http://support.microsoft.com/kb/943144

Some people experience an "endless reboot" issue...

From PA Bear [MS MVP]:
Workarounds:

http://msinfluentials.com/blogs/jes...ed-computer-boot-after-installing-xp-sp3.aspx
[NB: The above has been updated many times and now includes "a small tool
that will detect the IntelPPM problem and mitigate it before installing
[WinXP SP3]."

1. Boot into Safe Mode and rename INTELPMM.SYS to INTELPMM.OLD.
2. After booting into Safe Mode:
Start --> Run --> (copy/paste)
sc config intelppm start= disabled
--> OK --> Reboot into normal (Windows) mode.

Other references include:
.. http://aumha.net/viewtopic.php?p=187790#p187790
..
http://msinfluentials.com/blogs/jes...ed-computer-boot-after-installing-xp-sp3.aspx
.. http://www.theregister.co.uk/2008/05/09/windows_xp_sp3_reboots_crashes/
..
http://www.computerworld.com/action/article.do?command=viewArticleBasic&articleId=9084418
.. You receive a "Stop 0x0000007E" error message after you upgrade to Windows
XP Service Pack 2 or Service Pack 3 on a non-Intel-processor-based computer
(Revised 06 May-08)
http://support.microsoft.com/kb/888372
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top