Sources for Pin Puller to open Canon SX Toner Cartridges?

M

Michael Shell

Hi,

Can anyone recommend to me a good source for a tool for removing
the case pins on Canon SX (HP Laserjet II/III) toner cartridges?
I'm tired of always fiddling around with needle nose pliers for
removing those pesky plastic pins when cleaning out/reloading my
toner cartridges.

I see one listed here for about ten bucks:

http://www.lasergroup.com/supsx.htm

But I do not think that the Laser Group is still active as their
web page was last updated in 2002 and they did not respond to my
email.


Thanks in advance,

Mike Shell
 
J

jdgill

Mike:
I use a sheet metal screw that is just a little larger than the hole
in the plug. I hand screw it in, then take a claw hammer to pull
the plug out (like a nail). You could also use a plier to grab the
screw and pull the plug out. It works for me.
John
 
M

Mike Berger

Maybe because of what he said up front:
I see one listed here for about ten bucks:

But I do not think that the Laser Group is still active as their
web page was last updated in 2002 and they did not respond to my
email.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top