sending & receiving of data through network

S

syec

im having network connection with a server and 12 client computers one of my
computer is showing the connection is connected with 100mbps but in the
status its only receiving the data not sending at all, sending data is 0
always. when i connect other wire its ok. i checked with crimping also i
tried almost 10 rj45 connector but the problem is same but whn i used it with
different existing wire it shows me ok.. sending & receiving data are
perfectly alright please help me in this.. thnx.
 
R

Robert L. \(MS-MVP\)

If receiving or sending is 0, it could be incompatible issue. You may want
to check any new driver for the NIC or re-configure NIC speed. This post may
help too.

Solved: Limited connectivity with ...Dec 3, 2007 ... A: You may need to
re-configure the NIC, for example low the speed. This search result may
help, Troubleshooting limited or no connectivity ...
www.chicagotech.net/netforums/viewtopic.php?t=246


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Unwanted Internet Connection 10
need help with wirless device 12
sending data but not reciveing data 2
Computer not sending or receiving 9
Computer sending/receiving large amounts of data while idle 2
How do I network 2 machines 3
Sending packets, but not receiving 1
local area connection status receiving too much activity 1

Top