Sata Raid Setup

[imrede4glf]

Hello
This is one knowledgeable bunch of people so....

I have purchased 2(two) Hitachi Deskstar 7K250 120 GB Serial AT
7200RPM HD's.
I have done beaucoup(bu-koo)searches and printing out instruction
regarding installation procedures regarding XP,Raid 0, and clea
install methods.
I am using an Abit NF7S Ver 2, which means Nvidia NForce 2. There WAS
corruption issue with regard to the Silicon 3112a bios version, bu
apparently this has been resolved. I am wondering if anyone would b
willing to help me out with a direct and relatively simple instuctio
brief on the most efficient way to set these two HD's up with a clea
install in a RAID 0 configuration.(i.e., boot order of devices, when t
install OEM drivers etc..).
If it means a link...I will take it. Heck...I'll take anything. Ther
is too MUCH information out there and I think this forum may have th
latest information on Serial Raid setup's and Windows XP.
Thanks in advance to all replies


-
imrede4gl

 

[Carey Frisch [MVP]]

This step by step installation is done on a nForce2 ultra 400 (abit nf7-S )
http://www.tek-tips.com/gfaqs.cfm/pid/779/fid/4641

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/

-----------------------------------------------------------------------------------


|
| Hello
| This is one knowledgeable bunch of people so....
|
| I have purchased 2(two) Hitachi Deskstar 7K250 120 GB Serial ATA
| 7200RPM HD's.
| I have done beaucoup(bu-koo)searches and printing out instructions
| regarding installation procedures regarding XP,Raid 0, and clean
| install methods.
| I am using an Abit NF7S Ver 2, which means Nvidia NForce 2. There WAS a
| corruption issue with regard to the Silicon 3112a bios version, but
| apparently this has been resolved. I am wondering if anyone would be
| willing to help me out with a direct and relatively simple instuction
| brief on the most efficient way to set these two HD's up with a clean
| install in a RAID 0 configuration.(i.e., boot order of devices, when to
| install OEM drivers etc..).
| If it means a link...I will take it. Heck...I'll take anything. There
| is too MUCH information out there and I think this forum may have the
| latest information on Serial Raid setup's and Windows XP.
| Thanks in advance to all replies.
|
|
|
| --
| imrede4glf
| ------------------------------------------------------------------------
|
| ------------------------------------------------------------------------
| View this thread: http://www.mcse.ms/message430195.html
|

 

[imrede4glf]

*Hello
This is one knowledgeable bunch of people so....

I have purchased 2(two) Hitachi Deskstar 7K250 120 GB Serial AT
7200RPM HD's.
I have done beaucoup(bu-koo)searches and printing out instruction
regarding installation procedures regarding XP,Raid 0, and clea
install methods.
I am using an Abit NF7S Ver 2, which means Nvidia NForce 2. There WA
a corruption issue with regard to the Silicon 3112a bios version, bu
apparently this has been resolved. I am wondering if anyone would b
willing to help me out with a direct and relatively simple instuctio
brief on the most efficient way to set these two HD's up with a clea
install in a RAID 0 configuration.(i.e., boot order of devices, whe
to install OEM drivers etc..).
If it means a link...I will take it. Heck...I'll take anything.
There is too MUCH information out there and I think this forum ma
have the latest information on Serial Raid setup's and Windows XP.
Thanks in advance to all replies. *

Thank you very much for the link

Kevi


-
imrede4gl