SATA & PATA

[end user]

Board is a p4p800dlx running a P4 2.8ht, 1 gig of corsair pc3700.

My 2 WD 80gig PATA are runnning as master 1 & 2 ( none raid) on the
via controller. My 160gig WD SATA is set up as the only master on the
SATA controller, primary IDE is empty & secondary IDE has 2 optical
drives.

XPsp1 was copied over to the SATA drive using Drive image 2002.

No drivers installed for SATA.

I am now successfully booting from the SATA drive. MY BIG question is
that Sisoft Sandra 2004 states that my SATA is only transfering at 34
mg/s while my 80 gigs are transfering at 46 mg/s. Yet they are both 8
meg cache, & 7200 RMP drives.

What gives??

Thanks

Locust

 

[Outback Jon]

I am now successfully booting from the SATA drive. MY BIG question is
that Sisoft Sandra 2004 states that my SATA is only transfering at 34
mg/s while my 80 gigs are transfering at 46 mg/s. Yet they are both 8
meg cache, & 7200 RMP drives.

What gives??

Other than Sandra being a horrible program for benchmarking?

--
"Outback" Jon Gould | Let those who RIDE,
2003 Kawasaki Concours (wreck)|
1976 Honda CB750F (needs work)| DECIDE.
1972 Yamaha DS7 (project) |
(e-mail address removed) | HELMET LAWS SUCK
CQ CQ CQ de KC2BNE |
______________________________|____________________________
AMD XP 2400+ @ 2105 MHz 768M PC2100 DDR @ 280 MHz
Asus A7N8X-E Deluxe 120GB and 40GB Maxtor HD
Asus GeForceFX 5600 (330/650) Cornerstone 21" Monitor
Sony 52x40x52 CDRW HP D3857A 15" Monitor
Sony 16x40 DVD-ROM Nostromo n50 Speedpad
http://folding.stanford.edu - got folding?