Same Warning & Error Messages every day

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Every time I turn on computer, event viewer shows the following 2 --
1) Warning - Source E100B - Event ID 8 - Adapter Intel(R) PRO/100 VE Network
Connection. Did not receive auto negotiation from link partner. A duplex
mismatch may occur.
2) Error - Source Service Control Manager - Event ID 7000 - The IC Recorder
Device service failed to start due to the following error: the service cannot
be started, either because it is disabled or because it has not enabled
devices associated with it.

How can I stop these from occurring each time I boot up?
 
JanetN said:
Every time I turn on computer, event viewer shows the following 2 --
1) Warning - Source E100B - Event ID 8 - Adapter Intel(R) PRO/100 VE
Network
Connection. Did not receive auto negotiation from link partner. A duplex
mismatch may occur.
2) Error - Source Service Control Manager - Event ID 7000 - The IC
Recorder
Device service failed to start due to the following error: the service
cannot
be started, either because it is disabled or because it has not enabled
devices associated with it.

How can I stop these from occurring each time I boot up?
Click to expand...

Have you done a Google for a solution.
Just type in the search box 'event id 7000'
Good luck
Antioch
 
JanetN said:
Every time I turn on computer, event viewer shows the following 2 --
1) Warning - Source E100B - Event ID 8 - Adapter Intel(R) PRO/100 VE Network
Connection. Did not receive auto negotiation from link partner. A duplex
mismatch may occur.
2) Error - Source Service Control Manager - Event ID 7000 - The IC Recorder
Device service failed to start due to the following error: the service cannot
be started, either because it is disabled or because it has not enabled
devices associated with it.

How can I stop these from occurring each time I boot up?
Click to expand...

1) set a hard coded speed/duplexing in the NIC driver. Not recommended.
Recommended: fix the "link partner" to negotiate a link.
My Network Places->Properties->Network
Connection->Properties->Ethernet Card (intel)->Properties Somewhere in
there is the speed/duplex link. try it at your own risk

2) google it.
 
In
JanetN said:
Every time I turn on computer, event viewer shows the following 2 --
1) Warning - Source E100B - Event ID 8 - Adapter Intel(R) PRO/100 VE
Network Connection. Did not receive auto negotiation from link
partner. A duplex mismatch may occur.
Click to expand...

What are you connected to on the other end of that Ethernet cable? Hub?
Switch?
I'd recommend setting your NIC not to do autosensing, if it isn't working
right - try 100/full and see whether it works.


2) Error - Source Service Control Manager - Event ID 7000 - The IC
Recorder Device service failed to start due to the following error:
the service cannot be started, either because it is disabled or
because it has not enabled devices associated with it.
Click to expand...

Is that perhaps for a Panasonic MP3 player or something?
 
Back
Top