RPC and account/password

V

Vincent

Hello:
I have two questions regarding XP system.
1. I often see "Remote Procedure Call" (RPC) message on my
screen, and then my computer reboots in 60 seconds. How
can I fix this problem?

2. I accidentally changed my PC as a workstation (Logon
domain) and I could no longer access to any accounts on my
PC. All user names (even Administrator) and passwords do
not work. Is there any way I could get back access?

Thanks in advance!
Vincent
 
H

himon

Sounds like MSBlaster worm or the Welchia worm.

See
"Re: RPC service terminates session"
in this newsgroup

himon
 
G

Guest

#1.
Your computer is now infected with the W32.Blaster.Worm or
one of its variants. This happened because you have not
been using an internet connection firewall and have
apparently neglected to install the critical updates
available at the Windows Update website.
-----------------------------------------------------------
-------
If your computer is constantly attempting to shutdown
or reboot, quickly go to:

Start > Run and type: CMD , and hit enter.
This opens the Command Prompt window.

Then type: shutdown -a , and hit enter.

This should halt the rebooting problem.
-----------------------------------------------------------
-------
Then immediately turn-on Windows XP's built-in Firewall:
http://www.microsoft.com/security/protect/
(To enable the built-in firewall, go to:
Control Panel, double-click Networking and Internet
Connections, then click Network Connections. Right-click
your connection, then
Click Properties, and on the Advanced tab, click the option
"Protect my computer and network..." Note: the built in
firewall only monitors incoming traffic not outgoing (ie
spyware, trojans, etc.. you may have on your system).)

Special note if you use AOL:
America Online installs its own connection settings that
override
the ones that come with Windows XP. America Online's
connection settings don't include a way to turn on Windows
XP's
built-in firewall.


What You Should Know About the Blaster Worm and Its
Variants
http://www.microsoft.com/security/incident/blast.asp

A tool is available to remove Blaster worm and Nachi worm
infections from computers
that are running Windows 2000 or Windows XP
http://support.microsoft.com/?kbid=833330

A security issue has been identified that could allow an
attacker to
remotely compromise a computer running Microsoft Windows
and
gain complete control over it. You can help protect your
computer
by installing this update from Microsoft.
http://www.microsoft.com/downloads/details.aspx?
FamilyId=2354406C-C5B6-44AC-9532-
3DE40F69C074&displaylang=en

Above courtesy of MVP Carey
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

***Install a good firewall. ZoneAlarm is a free one you
can install.
Install a good anti-virus program making sure you keep
it's definitions up to date! ***
- - - - - - - - - - - - -
Microsoft Security Bulletin MS03-39
http://support.microsoft.com/?kbid=824146

What You Should Know About the Blaster Worm
http://www.microsoft.com/security/incident/blast.asp

Protect Your PC
http://www.microsoft.com/security/protect/default.asp

W32.Blaster.Worm a.k.a. W32/Lovesan.Worm
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm
..html

W32.Blaster.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm
..removal.tool.html

W32.Welchia.Worm a.k.a. W32/Nachi.Worm
http://securityresponse.symantec.com/avcenter/venc/data/w32
..welchia.worm.html

W32.Welchia.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.welchia.worm
..removal.tool.html
 
K

Ken Blake, MVP

In
Vincent said:
I have two questions regarding XP system.
1. I often see "Remote Procedure Call" (RPC) message on my
screen, and then my computer reboots in 60 seconds. How
can I fix this problem?


You have the MSBlaster worm. To remove it, do the following:

The following instructions are in three parts

1. Stop it from running

2. Remove it from your system

3. Make sure it doesn't come back



Before beginning, if you have an always-on internet connection,
it's a good idea to disconnect it.



1. Stop it from running

Press Ctrl-Alt-Delete to bring up the Task Manager, then on the
Processes tab, click msblast.exe and then "End process." Reply
"Yes" to the warning message that comes up.

This stops the worm from running, so your system will not shut
down. However, it doesn't remove it, and if that's all you do, it
will start up again the next time you boot.


***

2. Remove it from your system

a. Start the registry editor program, regedit, by going to Start
| Run, and typing REGEDIT
Navigate to HKEY_Local_Machine\Software\Microsoft\Windows\Current
Version\Run by clicking the plus signs next to each of the
folders in the left hand pane. When you get to the last of them,
Run, click the word Run itself.

Find an entry called "Windows Auto Update" on the right side.
Right-click it and delete it.

b. Do a Windows search for msblast, and delete all files found.

The worm is now gone, and won't start again the next time you
boot. But if that's all you do, you can get reinfected just as
you did the first time.

***


3. Make sure it doesn't come back

a. Make sure you're running a firewall that prevents worms like
this from getting in. You can enable the built-in Windows XP
firewall, or download and install another one such as the free
version of ZoneAlarm. To enable the built-in firewall, go to
Control Panel, double-click Networking and Internet Connections,

then click Network Connections. Right-click your connection, then
click Properties, and on the Advanced tab, click the option
"Protect my computer and network..."


b. If you've disconnected your internet connection, reconnect it.
Download and install the Microsoft patch at
http://support.microsoft.com/?kbid=824146 or

That will remove the vulnerability that the worm exploits.


c. Be sure you are running an anti-virus program, and that you
regularly download the latest updated virus definitions.
 
B

Bruce Chambers

Greetings --

If you connected the PC to the Internet without having first
enabled a firewall, without having first installed an antivirus
application with current virus definition files, and before installing
the KB824146 Hotfix, you're very likely to get infected from any of
the thousands of PCs on the Internet that are constantly broadcasting
the Blaster and/or Welchia worms. It only takes a few seconds of
exposure.

To stay on-line long enough to get the necessary updates, patches,
and removal tools, click Start > Run, and enter "shutdown -a" when the
next RPC countdown begins. This will abort the shut down. Also, make
sure you've enabled a firewall before starting, to preclude any more
intrusions while getting the updates/patches/tools.

Microsoft Security Bulletin MS03-39
http://support.microsoft.com/?kbid=824146

What You Should Know About the Blaster Worm
http://www.microsoft.com/security/incident/blast.asp

W32.Blaster.Worm a.k.a. W32/Lovesan.Worm
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm.html

W32.Blaster.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.blaster.worm.removal.tool.html

W32.Welchia.Worm a.k.a. W32/Nachi.Worm
http://securityresponse.symantec.com/avcenter/venc/data/w32.welchia.worm.html

W32.Welchia.Worm Removal Tool
http://www.symantec.com/avcenter/venc/data/w32.welchia.worm.removal.tool.html

McAfee AVERT Stinger
http://us.mcafee.com/virusInfo/default.asp?id=stinger


Bruce Chambers
--
Help us help you:



You can have peace. Or you can have freedom. Don't ever count on
having both at once. -- RAH
 
W

wojo

Another option is to disable the service to begin with then the countdown
won't begin at all.
Click RUN on the start menu type "services.msc /s" and Click OK
On the services window right click on "Remote Procedure Call (RPC)" and open
Properties
Under the Recovery Tab change each failure from "Restart the Computer" to
"Restart the Service"
You shouldn't get the shutdown message then so you'll be able to connect and
download the upgrades.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top