Router in xp embedded

[Guest]

Hi all,

Can anybody please tell me how can I configure router on xpe, while I've
added "network routing" functionality in my image (its associated components
are also added). My target pc has lan cards.
Now I dont know how to configure it and how to make my target pc a ROUTER.

I have got two ethernet cards attached to my target PC. What to do next ?


Thanks for your time and help.

 

[KM]

Sana,

This is general question and not really related to XPe componentization.
I'd recommend you to either read MSDN on the subject or post to windowsxp.general newsgroup.

Just a quick answer you can get if you use "route" command (make sure to add "TCP/IP Utilities" and "Routing Table Library"
components to your image)
For some brief description what you can do with Route command see these links:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/route.mspx
http://www.pacificnet.net/~bbruce/route_route_exe.htm
http://www.microsoft.com/resources/...Windows/XP/all/reskit/en-us/prcc_tcp_gvuf.asp



Netsh "routing ip" and "bridge" contexts will also be helpful to you:
http://www.microsoft.com/technet/pr...elp/327de2ff-75fe-402e-923c-eb5a80373111.mspx
http://www.microsoft.com/technet/pr...elp/a0200540-6662-4097-8cc7-6cf874dfcb5e.mspx

 

[Guest]

Hi KM,

I've got two LAN cards. My image does read them and have components for
routing. Now I just want to know how I can route traffic between these two
LAN card?

Thanks a lot for your time,

 

[KM]

Sana,

That called network bridging (and routing if you need to set up specific network routes on your system). Please look at the links I
sent out in the previous post of this thread.