RIS problem Windows 2003 after service pack 1 is applied

[Guest]

I have here some trouble with our ris setup (Windows XP SP2) after applying
Windows 2003 SP1 to our RIS server. I get the folowwing error again, in the
past the fix from KB article Q823658 solved this problem, but the patch won't
apply after SP1 anymore. The binlsvc.dll form SP1 has a higher version number
then the one in the patch mentioned.

The operating system image you selected does not contain the necessary
drivers for your network adapter. Try selecting a different operating system
image. If the problem persists, contact your administrator. Setup cannot
continue. Press any key to exit.

Does anyone have a solution which is different from removing service pack 1?

 

[Holger Schaal]

Hello Koekie,

I have here some trouble with our ris setup (Windows XP SP2) after
applying Windows 2003 SP1 to our RIS server. I get the folowwing error
again, in the past the fix from KB article Q823658 solved this
problem, but the patch won't apply after SP1 anymore. The binlsvc.dll
form SP1 has a higher version number then the one in the patch
mentioned.

The operating system image you selected does not contain the necessary
drivers for your network adapter. Try selecting a different operating
system image. If the problem persists, contact your administrator.
Setup cannot continue. Press any key to exit.

Does anyone have a solution which is different from removing service
pack 1?

-- have you found a solution to your problem? We just ran into the same -
but it seems to be strongly dependent on the type of netwerk adapter -
with some of the drivers it works, with other drivers it doesn't work ...

Please give me a short feedback on your experience with this problem.

Thanks in advance

Holger

 

[Holger Schaal]

Hi Koekie,

I have here some trouble with our ris setup (Windows XP SP2) after
applying Windows 2003 SP1 to our RIS server. I get the folowwing error
again, in the past the fix from KB article Q823658 solved this
problem, but the patch won't apply after SP1 anymore. The binlsvc.dll
form SP1 has a higher version number then the one in the patch
mentioned.

The operating system image you selected does not contain the necessary
drivers for your network adapter. Try selecting a different operating
system image. If the problem persists, contact your administrator.
Setup cannot continue. Press any key to exit.

Does anyone have a solution which is different from removing service
pack 1?

-- I just found out how to solve our problems: in the past I replaced the
original Windows XP SP2 driver for Intel Gigabit Adapters with one from
the Intel Homepage - but tried to install a Dell PC with Intel LOM (LAN
on motherboard). Until Windows 2003 SP1 this worked for us - and we could
install with the actual files from Intel every desktop having an Intel
NIC - but now we have to use the original Dell Intel LOM drivers - then
it works with W2k3 SP1 AND the Dell PC - but these drivers are a little
bit old (E1000325.sys and .inf is time-stamped with 2003/11/07 :-( ) - so
it will be a problem with other desktops, using a more recent card ...

Holger - further looking for a better solution ...

 

[Guest]

I had the same problem with a Dell Optiplex 170L and some other HP: Go to
the following link for fix:
http://www.wug-nordic.net/articles/ris-add-nic.htm