RIS Error

G

Guest

I have my windows 2000 RIS setup on my DHCP server

I am getting a error " PXE-E53: No Boot filename recieved". Earlier This setup was working fine. But suddenly I am getting this error. When I check the event viewer on the RIS server I see the event from BINLSVC stating "The BINL service encountered an error while attempting to connect to the directory service. The error code is in the record data.

I have enabled the debugging for BINL service and the log file shows as
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 <
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 <
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 <
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:11 [ERRORS] ldap_connect failed: 5
[BinlServer] 03/15 12:06:11 [ERRORS] Failed to connect to LDAP server
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 <
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e4
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 <
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 <
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 <
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:12 [ERRORS] ldap_connect failed: 5
[BinlServer] 03/15 12:06:12 [ERRORS] Failed to connect to LDAP server
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 <
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e4

Can anyone help m
 
J

Johan Arwidmark

Looks like the client cannot locate the RIS Server...or that the tftp
directory on the server is missing

Make sure the RIS Server is authorized...

Check that the RIS services are running (BINL, TFTP and the Groveler
service)

You may also try run risetup -check

regards
Johan Arwidmark

Windows User Group - Nordic
http://www.wug-nordic.net


I have my windows 2000 RIS setup on my DHCP server.

I am getting a error " PXE-E53: No Boot filename recieved". Earlier This setup was working fine. But suddenly I am getting this error. When I check the event viewer on the RIS server I see the event from BINLSVC stating "The BINL service encountered an error while attempting to connect to the directory service. The error code is in the record data."

I have enabled the debugging for BINL service and the log file shows as:
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504}
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504}
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504}
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 < 0
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 < 0
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e2e
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e2e
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504}
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 < 0
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e2e
[BinlServer] 03/15 12:06:11 [ERRORS] ldap_connect failed: 51
[BinlServer] 03/15 12:06:11 [ERRORS] Failed to connect to LDAP server.
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 < 0
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e43
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504}
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504}
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504}
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 < 0
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 < 0
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e2e
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e2e
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504}
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 < 0
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e2e
[BinlServer] 03/15 12:06:12 [ERRORS] ldap_connect failed: 51
[BinlServer] 03/15 12:06:12 [ERRORS] Failed to connect to LDAP server.
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 < 0
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e43


Can anyone help me
Click to expand...
 
G

Guest

Johan

I have already tried running risetup - check. But this check does not show any problem. This check shows all that RIS services are running properly

What else do I need to check
 
J

Johan Arwidmark

Is it a multihomed server? Or do you have multiple IP addresses on the
NIC?

All NICs must have an active scope when using RIS on a multihomed
server

Have you tried to unathorize and then authorize again?

Do you have any other PXE services like ADS or IP Phone?

Do you have clients on other VLANs (behind a router)?

I suggest you start Network Monitor on the server and actually finds
out what is going over the wire...

regards
Johan Arwidmark

Windows User Group - Nordic
http://www.wug-nordic.net
 
G

Guest

Johan

We do have IP Phones in our network. But RIS was working even in this environment. I am not clear how IP phones can affect RIS service

If I have to monitor the Wire.. What is that I should look for

Can you please help me

Thanks & Regard

Yuvaraj G
 
J

Johan Arwidmark

Sometimes the IP Phone systems are using the same DHCP options (66 or
67) as DHCP and RIS is using...

Have you enabled the "do not respond to unknown client computers"
checkbox on the RIS server?

Have you checked the event logs (system and application) for errors on
DHCP, DNS, RIS (BINLSVC) and Active Directory?

Regarding monitoring you should look for the traffic between client
and DHCP and RIS Server . it should be in this order..

1. DHCP Discover on port 67

2. DHCP Offer on port 68 (includes the ip of dhcp server)

3. DHCP Request on Installation Server port 67

4. DHCP Ack reply on port 68, this ack should include Server Host Name
(FQDN) and the bootfile name (OSChooser/i386/startrom.com)

5. TFTP request on port 69 (startrom.com)


regards
Johan Arwidmark

Windows User Group - Nordic
http://www.wug-nordic.net
 
G

Guest

Wait!!! John
Where in the services list does the groveler show up? it doesnt show up in my services tab
(how can I reinstall that . any idea?
Where is the TFTP directory on the server
how do I turn debugging for BINL service on??

thanks..
----- Johan Arwidmark wrote: ----

Looks like the client cannot locate the RIS Server...or that the tft
directory on the server is missin

Make sure the RIS Server is authorized..

Check that the RIS services are running (BINL, TFTP and the Grovele
service

You may also try run risetup -chec

regard
Johan Arwidmar

Windows User Group - Nordi
http://www.wug-nordic.ne


On Mon, 15 Mar 2004 00:11:05 -0800, Yuvaraj
I have my windows 2000 RIS setup on my DHCP server
I am getting a error " PXE-E53: No Boot filename recieved". Earlier This setup was working fine. But suddenly I am getting this error. When I check the event viewer on the RIS server I see the event from BINLSVC stating "The BINL service encountered an error while attempting to connect to the directory service. The error code is in the record data.
I have enabled the debugging for BINL service and the log file shows as
Click to expand...
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 <
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 <
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:11 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 <
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:11 [ERRORS] ldap_connect failed: 5
[BinlServer] 03/15 12:06:11 [ERRORS] Failed to connect to LDAP server
[BinlServer] 03/15 12:06:11 [OPTIONS] Client ignored - Not answering requests from boot 4 <
[BinlServer] 03/15 12:06:11 [STOC] BinlDiscover failed with Dhcp server, 0x4e4
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 <
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 <
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:12 [MISC] Client Guid: {b7774709-2938-11d6-942c-97e9dcb6c504
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 <
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e2
[BinlServer] 03/15 12:06:12 [ERRORS] ldap_connect failed: 5
[BinlServer] 03/15 12:06:12 [ERRORS] Failed to connect to LDAP server
[BinlServer] 03/15 12:06:12 [OPTIONS] Client ignored - Not answering requests from boot 6 <
[BinlServer] 03/15 12:06:12 [STOC] BinlDiscover failed with Dhcp server, 0x4e4
Click to expand...
 
G

Guest

----- markb wrote: ----

Wait!!! John
Where in the services list does the groveler show up? it doesnt show up in my services tab
(how can I reinstall that . any idea?
Where is the TFTP directory on the server
how do I turn debugging for BINL service on??

thanks..
FURTHER info
Similar problem
RIS broken
using
dumb hub. w2003 enteprise edition as AD, RIS, DHCP, DNS server and BRAND new
supported client BOTH on same dumb 100mb hu
behind a firewall
Checked the dhcp mmc. verified my server was authorized by ip. ALSO deleted, reauthorized, no effect
Get same error PXE-E51, no dhcp/or proxy dhcp offers were received
HOWEVER this client HAS received the offer, an IP address, and gotten as far as the F12,
and screen sequences in the past, so I KNOW this built in NIC is supported

I even tried turning off the other dhcp server (different address range), from my firewall, nothing (rebooted ris/server to see if did anything, nope
even tried to authorize the fw server in the dhcp mmc snap in, rebooted, nothing changed
GETTING DESPERATE to deploy servers, PLEASE help me! I;m desperate, AND I'm an OEM!!!
 
G

Guest

Found the Groveler service under System (single instance storage.) REALLy. SO user friendly
Might as well go to *nix
Yes, I turned on BINL debugging (full mode) on
STILL doesnt show anything
 
G

Guest

OK.... I am in a total state of disbelief

....remember..
I said
dumb hub.on hub was both w2003 enterprise server. brand new shuttle ss-g51,
and (didn't say, but) a realtek RTL8139 based (built-in)
100mb ethernet nic. Remember I verified all svces were up, got NO responses, even went as far as staritng network monitor. didnt see a thing

Oh well
I started to give up and install the RBFG (remote boot floppy generator...
lo, and behold, it took, gave me a F12 prompt, and worked
I then took out the floppy drive, did it again, and it STILL WORKED

WTF IS THIS, can someone really explain this??

but bottom line is , it still works again

mar

----- markb wrote: ----

Found the Groveler service under System (single instance storage.) REALLy. SO user friendly
Might as well go to *nix
Yes, I turned on BINL debugging (full mode) on
STILL doesnt show anything
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

RIS on separate server than AD/DHCP (error PXE-E55) 4
Help with RIS on win2003 2
WSUS Updates Failed to Download Error message 0X80244019 0
Windows XP User Account keeps getting locked out 1
Game doesn't work after MS update 8
Cannot Join 2003 domain 1
This error keeps coming back 5
Can not boot to SAFE MODE, STOP ERROR 10

Top