repeated crashing

G

Guest

Moviemaker 2 keeps crashing.
I get this message.
Would anyone be able to tell me what this means?
Thanks in advance

Marcus

Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Description:
Faulting application moviemk.exe, version 2.0.3312.0, faulting module iviaudio.ax, version 4.5.28.80, fault address 0x00037731.
 
J

John Kelly

Hello there,

You sound as though you are suffering from a codec problem.

The one stop solution for that is a program called Rename Codecs and it is
available from my web site. Make sure you check out the FAQ, on the site, on
what it does and how to run it (That will take about one minute of your time!!)
All the info you need is on the web site.

This reassuringly safe to use program requires no knowledge on your part about
what it is doing or how it is doing it or what it is doing it too!!! neither do
you need to know where any of these files are or whether it is safe to rename
them or not.....and best of all, ITS FREE !!!

I have also found that MP3, Mpeg and Jpeg files can cause problems, So...

Convert all MP3 to AVI

Convert all MPeg to AVI

Convert all Jpeg to BMP

If this does not solve your problem then try the following out...it has proved
to be a successful procedure for a variety of problems.

1) Download the full version of DirectX Ver 9.0b, Media Player 9 and Movie
Maker 2.

2) Reboot you computer and Install DirectX

3) Reboot again and install Windows Media Player 9

4) Reboot yet again and install Movie Maker 2

5) Reboot one more time

Yes it sounds very tedious, but if you want to be certain all file locks are
removed so that the correct files can be installed this is the way you have to
go.

It is very important that you only download the full versions of these programs
and that you DO NOT attempt an install over the internet.

Other Notes
===========

There is in my view some very bad advice floating around that tells you to
unregister the offending codec. If you take this advise be warned that
unregistering any file and doing it wrong will more than likely stop the
program that file belongs to from working all together and may in an extreme
situation cause your entire XP system to fail. This is true whether you make a
mistake using the Registry editor or the registration program itself, one
mistake and you are potentially in deep trouble. Whatever you unregister in
this manner has to be restored and you should take note that the registration
of a codec can often involve more than one registry entry. If you are expert in
these matters you will have no problem.
 
P

PapaJohn

See the Problem Solving > Acceleration and Codecs page of my site. Your
iviaudio.ax file is one of the codecs listed as having conflicts with MM2.
--
PapaJohn
Movie Maker 2: www.papajohn.org
PhotoStory 2: www.photostory.papajohn.org
..
..
marcushnz said:
Moviemaker 2 keeps crashing.
I get this message.
Would anyone be able to tell me what this means?
Thanks in advance

Marcus

Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Description:
Faulting application moviemk.exe, version 2.0.3312.0, faulting module
iviaudio.ax, version 4.5.28.80, fault address 0x00037731.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top