Repair portion of installation from CD

G

Guest

After a live update (thank you Microsoft) I restarted as instructed only to
find Windows XP Pro crashed. I used Recovery console to repair sectors of HD
corrupted and then since nothing else recommended in help and support worked
the repair option of the installation process.

The repair completed successfully and the system rebooted into Windows XP
setup. Now my problem is that all updates including SP1 and SP2 were
installed but my CD doesn't have either and setup is looking for "asms" file
from SP1.

I read about and could slipstream a CD but SP1 is no longer available so my
question is:

Should a slipstream with SP1A and then with SP2 and if I do will should I
then use that CD to repair the install or just let setup find the files it
needs on the new CD?

Another matter for concern is that I have installed a fix for XP Pro that
makes it so it will still auto executive java add-ins.
 
H

Haggis

assist said:
After a live update (thank you Microsoft) I restarted as instructed only to
find Windows XP Pro crashed. I used Recovery console to repair sectors of HD
corrupted and then since nothing else recommended in help and support worked
the repair option of the installation process.

The repair completed successfully and the system rebooted into Windows XP
setup. Now my problem is that all updates including SP1 and SP2 were
installed but my CD doesn't have either and setup is looking for "asms" file
from SP1.

I read about and could slipstream a CD but SP1 is no longer available so my
question is:

Should a slipstream with SP1A and then with SP2 and if I do will should I
then use that CD to repair the install or just let setup find the files it
needs on the new CD?

Another matter for concern is that I have installed a fix for XP Pro that
makes it so it will still auto executive java add-ins.

install/slipstream SP2 it contains all updates of SP1 etc.

java settings can adjusted in your browser settings :>
 
G

Guest

Thanks for letting me know that all I need to concern myself with is the SP2
update. I created the CD and the repair appeared to work fine.

Setup is now looking for the file 'asms' on Windows XP Professional Service
Pack 2 CD which of course exists as a directory but not as a file on the CD
 
G

Guest

assist said:
After a live update (thank you Microsoft) I restarted as instructed only to
find Windows XP Pro crashed. I used Recovery console to repair sectors of HD
corrupted and then since nothing else recommended in help and support worked
the repair option of the installation process.

The repair completed successfully and the system rebooted into Windows XP
setup. Now my problem is that all updates including SP1 and SP2 were
installed but my CD doesn't have either and setup is looking for "asms" file
from SP1.

I read about and could slipstream a CD but SP1 is no longer available so my
question is:

Should a slipstream with SP1A and then with SP2 and if I do will should I
then use that CD to repair the install or just let setup find the files it
needs on the new CD?

Another matter for concern is that I have installed a fix for XP Pro that
makes it so it will still auto executive java add-ins.
 
G

Guest

assist said:
After a live update (thank you Microsoft) I restarted as instructed only to
find Windows XP Pro crashed. I used Recovery console to repair sectors of HD
corrupted and then since nothing else recommended in help and support worked
the repair option of the installation process.

The repair completed successfully and the system rebooted into Windows XP
setup. Now my problem is that all updates including SP1 and SP2 were
installed but my CD doesn't have either and setup is looking for "asms" file
from SP1.

I read about and could slipstream a CD but SP1 is no longer available so my
question is:

Should a slipstream with SP1A and then with SP2 and if I do will should I
then use that CD to repair the install or just let setup find the files it
needs on the new CD?

Another matter for concern is that I have installed a fix for XP Pro that
makes it so it will still auto executive java add-ins.

Complaints in newsgroups, etc., about this "missing asms file" issue go back
about five years. I personally have encountered the error at least three
times in as many years. Microsoft's Knowledge Base article Q311755 -- the
one that MVPs refer XP users to when they respond to this complaint -- is
irrelevant and useless. What we have here is a serious bug in the Windows XP
setup CD that MVPs probably do not know about. Not only is it a serious
defect, one that affects virtually every copy of XP Professional Setup CD and
DVD (I don't know about Home ed, never used it), but it is a defect that has
never been acknowledged by Microsoft; there is no helpful KB article about
it, no workaround.

It's as hard to be precise about this as it is to be brief, because now that
I've spent three days restoring my OS and apps, I don't want to step through
the XP CD setup steps again. But I can summarize briefly for all MVPs who
may be listening: 1) what leads up to this Windows XP setup disk error; 2)
how to reproduce the "missing asms file" bug on the XP setup CD; 3) why the
KB article Q31175 is unhelpful.

1. A user elects this "repair" option in the XP Setup only after all other
efforts to recover have failed. I got to this do-or-die place last week by
exporting and then deleting 10 registry keys that all pertained (I thought)
to an app that didn't properly uninstall itself.

You've tried "Last Known Good Configuration", Safe Boot and its variants,
and you know you can't boot to Safe mode; you've tried "Don't reboot after
startup failure" (or whatever the wording is, toward the bottom of the list)
-- you'll get a Hex 7B error code in this case, which no one in all of New
Delhi understands. Without Safe Mode, you cannot import saved "reg" files,
run the Reg.exe tool, restore a System State backup made with NT Backup, or
use System Restore. You've tried the Recovery Console, and copied the
original five registry files from Repair subfolder of Sys32, and that doesn't
work either.

2. According to the authoritative "Windows XP: Inside Out" (Microsoft,
2001, p.815ff), "you may be able to repair your Windows XP installation using
the Windows Setup program. . . . The repair option is quick and painless..."
The same advice appears in other XP books. This is *not* the repair option
that appears right after "Welcome to Setup" screen. At that screen, press
Enter, not R. Then press F8 to accept the EULA, and from the screen showing
your Windows installations (usually one), choose the correct installation,
and *then* press R. The setup program reloads XP OS files, then reboots your
PC. Soon after this reboot, you'll get a message saying the system cannot
find a file called "ASMS", and it gives you an input box to enter the correct
path of that file. However, though an ASMS *folder* exists, there is no ASMS
file on *any* Windows XP setup disk, no way to work around the error, and no
way (for any XP Professional user anywhere in the world) to continue past
this point. The "repair" option has to fail for everyone who tries it.


At this point, you write to a newsgroup or search Microsoft or Google for a
KB article that could help. Or, like me, you call Microsoft Tech Support
(incident 1038826788) about the problem -- they'll guide you through all the
above steps, and then give up when you get to the ASMS error, advise you to
reinstall XP, and refund your $80.

3. The only Microsoft Knowledge Base article that pertains to this issue,
Q311755, under the section on the NTFS file system, offers three "methods" to
fix the problem. The first, running RegEdit, can only work if you can get to
the command prompt -- but if you could run Windows in Safe Mode, you would
not be using this last resort from the setup disk in the first place. The
second method advises installing Windows in another partition; no thanks,
that is no easier than reinstalling the whole OS on the main partition. The
third method says to "use the original XP CDROM" (the one with the hologram),
not a copy. If the original can't be found, "look for the Asms folder. If
the folder is missing or the files that it contains are zero bytes, the
CD-ROM was not burned correctly. "

But as stated above, while an ASMS folder exists, there is no ASMS file,
even on the hologram copy of the XP Pro setup CD. That's why this third
solution always fails.

It is time Microsoft publicly acknowledged this defect in its omnipresent XP
Setup disk CD and offer some kind of workaround. I also would appreciate it
if Microsoft tech support representatives would stop pretending they don't
know about this issue. I am convinced they do know about it, because in all
three cases where I have called upon their help over the past three years,
they have known when to give up and offer a refund: "ASMS File Not Found" is
endgame; they all know it, and unlike the KB article, they don't bother
asking you if you are using an original hologram XP setup disk or advising
you to try a different CD ROM drive, because they know that neither of these
steps makes any difference.

I don't plan to buy Vista until all the serious bugs in XP have been worked
out. I can handle minor bugs -- no OS is perfect -- but this is not minor!
I suggest other XP Professional users do likewise.
 
E

Ernie Lester

David B said:
Complaints in newsgroups, etc., about this "missing asms file" issue go back
about five years. I personally have encountered the error at least three
times in as many years. Microsoft's Knowledge Base article Q311755 -- the
one that MVPs refer XP users to when they respond to this complaint -- is
irrelevant and useless. What we have here is a serious bug in the Windows XP
setup CD that MVPs probably do not know about. Not only is it a serious
defect, one that affects virtually every copy of XP Professional Setup CD and
DVD (I don't know about Home ed, never used it), but it is a defect that has
never been acknowledged by Microsoft; there is no helpful KB article about
it, no workaround.

It's as hard to be precise about this as it is to be brief, because now that
I've spent three days restoring my OS and apps, I don't want to step through
the XP CD setup steps again. But I can summarize briefly for all MVPs who
may be listening: 1) what leads up to this Windows XP setup disk error; 2)
how to reproduce the "missing asms file" bug on the XP setup CD; 3) why the
KB article Q31175 is unhelpful.

1. A user elects this "repair" option in the XP Setup only after all other
efforts to recover have failed. I got to this do-or-die place last week by
exporting and then deleting 10 registry keys that all pertained (I thought)
to an app that didn't properly uninstall itself.

You've tried "Last Known Good Configuration", Safe Boot and its variants,
and you know you can't boot to Safe mode; you've tried "Don't reboot after
startup failure" (or whatever the wording is, toward the bottom of the list)
-- you'll get a Hex 7B error code in this case, which no one in all of New
Delhi understands. Without Safe Mode, you cannot import saved "reg" files,
run the Reg.exe tool, restore a System State backup made with NT Backup, or
use System Restore. You've tried the Recovery Console, and copied the
original five registry files from Repair subfolder of Sys32, and that doesn't
work either.

2. According to the authoritative "Windows XP: Inside Out" (Microsoft,
2001, p.815ff), "you may be able to repair your Windows XP installation using
the Windows Setup program. . . . The repair option is quick and painless..."
The same advice appears in other XP books. This is *not* the repair option
that appears right after "Welcome to Setup" screen. At that screen, press
Enter, not R. Then press F8 to accept the EULA, and from the screen showing
your Windows installations (usually one), choose the correct installation,
and *then* press R. The setup program reloads XP OS files, then reboots your
PC. Soon after this reboot, you'll get a message saying the system cannot
find a file called "ASMS", and it gives you an input box to enter the correct
path of that file. However, though an ASMS *folder* exists, there is no ASMS
file on *any* Windows XP setup disk, no way to work around the error, and no
way (for any XP Professional user anywhere in the world) to continue past
this point. The "repair" option has to fail for everyone who tries it.


At this point, you write to a newsgroup or search Microsoft or Google for a
KB article that could help. Or, like me, you call Microsoft Tech Support
(incident 1038826788) about the problem -- they'll guide you through all the
above steps, and then give up when you get to the ASMS error, advise you to
reinstall XP, and refund your $80.

3. The only Microsoft Knowledge Base article that pertains to this issue,
Q311755, under the section on the NTFS file system, offers three "methods" to
fix the problem. The first, running RegEdit, can only work if you can get to
the command prompt -- but if you could run Windows in Safe Mode, you would
not be using this last resort from the setup disk in the first place. The
second method advises installing Windows in another partition; no thanks,
that is no easier than reinstalling the whole OS on the main partition. The
third method says to "use the original XP CDROM" (the one with the hologram),
not a copy. If the original can't be found, "look for the Asms folder. If
the folder is missing or the files that it contains are zero bytes, the
CD-ROM was not burned correctly. "

But as stated above, while an ASMS folder exists, there is no ASMS file,
even on the hologram copy of the XP Pro setup CD. That's why this third
solution always fails.

It is time Microsoft publicly acknowledged this defect in its omnipresent XP
Setup disk CD and offer some kind of workaround. I also would appreciate it
if Microsoft tech support representatives would stop pretending they don't
know about this issue. I am convinced they do know about it, because in all
three cases where I have called upon their help over the past three years,
they have known when to give up and offer a refund: "ASMS File Not Found" is
endgame; they all know it, and unlike the KB article, they don't bother
asking you if you are using an original hologram XP setup disk or advising
you to try a different CD ROM drive, because they know that neither of these
steps makes any difference.

I don't plan to buy Vista until all the serious bugs in XP have been worked
out. I can handle minor bugs -- no OS is perfect -- but this is not minor!
I suggest other XP Professional users do likewise.
 
E

Ernie Lester

Davis B wrote in 2007 but I have just encountered this problem when trying to
set up "XP Home" on a virtual machine. David pointed out that although there
is an "ASMS" Folder there is no ASMS File.
Has any solution surfaced since he wrote his comment?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top