M
Mike Rigby
Hey there!
I want to use my laptop (running windows xp pro), that i take away
with me, to remote desktop into a home computer (also on xp pro) which
is behind a D-link DSL-504 Router. I know i need to set up a VPN but i
dont understand how to set up my router. Any help would be much
appreciated. I have read that i need to enable the DMZ in the NAT to
allow direct connections to the computer on the LAN and use a software
firewall. I tried it but to no avail as i dont think i set up the rest
of the router settings properly
The easiest thing to do would be to go thru my router settings:-
So does anyone have a list of ports i would need to redirect (TCP &
UDP) and where to (the internal ip of my home computer on the LAN)?
What Layer 2 Filtering do i want? (The ones not selected are: IP
Broadcast; RARP; IEEE 802.1Q packet)
DHCP is disabled
Do i want to use 'IP Masquerade Pass Through' for both IPsec and PPTP?
Do i need anything in 'Static Route Configuration'?
What about in 'Advanced Filtering & Firewall'?
RIP??? Both ethernet and my ISP are set to send and accept none!
UPnP is enabled
I realise there are a lot of questions here and not all the answers to
them will be relevant but i
would really appreciate any help, hints or ideas you have!
Cheers,
Mike
miker (at) 37 (dot) com
I want to use my laptop (running windows xp pro), that i take away
with me, to remote desktop into a home computer (also on xp pro) which
is behind a D-link DSL-504 Router. I know i need to set up a VPN but i
dont understand how to set up my router. Any help would be much
appreciated. I have read that i need to enable the DMZ in the NAT to
allow direct connections to the computer on the LAN and use a software
firewall. I tried it but to no avail as i dont think i set up the rest
of the router settings properly
The easiest thing to do would be to go thru my router settings:-
So does anyone have a list of ports i would need to redirect (TCP &
UDP) and where to (the internal ip of my home computer on the LAN)?
What Layer 2 Filtering do i want? (The ones not selected are: IP
Broadcast; RARP; IEEE 802.1Q packet)
DHCP is disabled
Do i want to use 'IP Masquerade Pass Through' for both IPsec and PPTP?
Do i need anything in 'Static Route Configuration'?
What about in 'Advanced Filtering & Firewall'?
RIP??? Both ethernet and my ISP are set to send and accept none!
UPnP is enabled
I realise there are a lot of questions here and not all the answers to
them will be relevant but i
would really appreciate any help, hints or ideas you have!
Cheers,
Mike
miker (at) 37 (dot) com