Remote Access and Error 20082

[Guest]

Have Win2K Server (sp4) accepting Incoming Connections for two users.
Incoming VPN has been running fine for over a year..then stopped. Server
event logs show error in Remote Access id #20082. When server re-boots
Event log records: "The Remote Access Server could not reset lana 0 (the
error code is the data) and will not be active on it" Source: Remote Access.
Users see message stating that their credentials were incorrect.

Eventid.net posts (from newsgroups) suggest: Disable NetBEUI on the external
adapter, disable NetBIOS over TCP/IP on the external adapter, and disable
NetBEUI on the RAS/VPN interface/connection.

Tried, but did not reslove the issue.

Any thoughts or ideas would be greatly appreciated.

 

[Guest]

Hi,

having the same problem. Also Win2000 sp4.
No progress so far.

In my case I am having this problem
with a dial-in connection. The errors are logged
every time the machine is being rebooted.
Also disabled NetBEUI.

 

[Webstruck]

*Have Win2K Server (sp4) accepting Incoming Connections for two
users.
Incoming VPN has been running fine for over a year..then stopped.
Server
event logs show error in Remote Access id #20082. When server
re-boots
Event log records: "The Remote Access Server could not reset lana 0
(the
error code is the data) and will not be active on it" Source: Remote
Access.
Users see message stating that their credentials were incorrect.

Eventid.net posts (from newsgroups) suggest: Disable NetBEUI on the
external
adapter, disable NetBIOS over TCP/IP on the external adapter, and
disable
NetBEUI on the RAS/VPN interface/connection.

Tried, but did not reslove the issue.

Any thoughts or ideas would be greatly appreciated.

 

[Robert L [MVP - Networking]]

Thank you for the post.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com

I have a solution that works for me on this error.
Uninstall *KB935839*, *KB935966*, *KB933566*, *KB935840*, *KB927891*,
*KB926122* and restart the server. The VPN will works like before.