Reinstalling XP Home OEM

[Ramesh]

Hi,

I intend to freshly install XP Home OEM on my system from scratch. Are
there any precautions to take? Can I just format the disk and run setup?

Will there be any issues with activating? I am reinstalling on the same
hardware.

Thanks
Ramesh

 

[Carey Frisch [MVP]]

The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:

NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except the monitor, mouse and keyboard, before installing XP.

NOTE: If you have an internal Zip Drive installed, physically disconnect the
EIDE and power cable to it before proceeding, otherwise your main
hard drive may not be assigned the customary C: drive letter.
After installing Windows XP, you may then reconnect it.

1. Open your BIOS and set your "CD Drive as the first bootable device".

===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm

2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete all the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.

5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html

[Courtesy of Michael Stevens, MS-MVP]

6. ==> Immediately after installing Windows XP, turn on XP's Firewall.
==> http://www.microsoft.com/security/protect/

7. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".

8. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.

9. If you happen to run into any installation difficulties, use the following resources:

How to Troubleshoot Windows XP Problems During Installation
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310064

Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm

[Courtesy of MS-MVP Kelly Theriot]

Note: If you are unable to activate Windows XP again via the internet,
then select the option to "activate by telephone".

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/

----------------------------------------------------------------------------------------


| Hi,
|
| I intend to freshly install XP Home OEM on my system from scratch. Are
| there any precautions to take? Can I just format the disk and run setup?
|
| Will there be any issues with activating? I am reinstalling on the same
| hardware.
|
| Thanks
| Ramesh

 

[Ramesh]

Thanks Carey.

Sorry I forgot to mention that this is a reinstall. I have already
installed and activated it once on the same PC. That is my concern.

Thanks
Ramesh

The Windows XP CD is bootable and contains all the tools necessary
to partition and format your drive. Follow this procedure and allow
Windows XP to partition and format your drive:

NOTE: It would be best to physically disconnect all your peripheral hardware
devices, except the monitor, mouse and keyboard, before installing XP.

NOTE: If you have an internal Zip Drive installed, physically disconnect the
EIDE and power cable to it before proceeding, otherwise your main
hard drive may not be assigned the customary C: drive letter.
After installing Windows XP, you may then reconnect it.

1. Open your BIOS and set your "CD Drive as the first bootable device".

===> Accessing Motherboard BIOS
===> http://www.michaelstevenstech.com/bios_manufacturer.htm

2. Insert your Windows XP CD in the CD Drive and reboot your computer.
3. You'll see a message to boot to the CD....follow the instructions.
4. The setup menu will appear and you should elect to delete all the existing
Windows partitions, then create a new partition, then format the primary
partition (preferably NTFS) and proceed to install Windows XP.

5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html

[Courtesy of Michael Stevens, MS-MVP]

6. ==> Immediately after installing Windows XP, turn on XP's Firewall.
==> http://www.microsoft.com/security/protect/

7. After Windows XP is installed, visit the Windows Update website
and download the available "Critical Updates".

8. After installing the critical updates, be sure and visit the support website
of the manufacturer of the computer to download and install any
available Windows XP compatible drivers, such as video adapter
and audio drivers.

9. If you happen to run into any installation difficulties, use the following resources:

How to Troubleshoot Windows XP Problems During Installation
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310064

Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm

[Courtesy of MS-MVP Kelly Theriot]

Note: If you are unable to activate Windows XP again via the internet,
then select the option to "activate by telephone".

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User

Be Smart! Protect your PC!
http://www.microsoft.com/security/protect/

-------------------------------------------------------------------------- --------------


| Hi,
|
| I intend to freshly install XP Home OEM on my system from scratch. Are
| there any precautions to take? Can I just format the disk and run setup?
|
| Will there be any issues with activating? I am reinstalling on the same
| hardware.
|
| Thanks
| Ramesh

 

[Robert Kopp]

Thanks Carey.

Sorry I forgot to mention that this is a reinstall. I have already
installed and activated it once on the same PC. That is my concern.

Although I haven't done it, I don't think there are any problems. The
activation procedure allows you to activate online, just as you did
before. (Somehow an electronic "fingerprint" identifying the computer is
recorded, which will be the same next time it is installed.)

 

[Bruce Chambers]

Greetings --

The only precaution I can think of is to be sure you've backed up
everything (data files) you want to save.

There's no limit to the number of times you can reinstall and
activate the same WinXP license on the same PC. Nor is there ever a
charge. If it's been more than 120 days since you last activated
that specific Product Key, you'll most likely be able to activate via
the Internet without problem. If it's been less, you might have to
make a 5 minute phone call.

Here are the facts pertaining to activation:

Piracy Basics - Microsoft Product Activation
http://www.microsoft.com/piracy/basics/activation/

Windows Product Activation (WPA)
http://www.aumha.org/a/wpa.htm


Bruce Chambers

--
Help us help you:




You can have peace. Or you can have freedom. Don't ever count on
having both at once. -- RAH