RDP - Vista to XP Pro - drops imediately

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello all,

Target system is XP Pro SP2+, with the RDP Client 6.0 update installed

Client is Vsta Business, also up to patch

If I attempt to connect to the XP Pro system from home or on the road
with an XP system RDP works fine. If I use the Vista Business laptop I can
connect, but then I drop after a second or so.

I've gone to the page suggested that shows the Vista RDP advanced setting
suggestions and made the changes. I've also checked the firewall settings on
the XP system exceptions and added an RDP exception to port 3389 in the Vista
firewall exception list. Before I added the exception to the Vista system
firewall I would connect, get part of a screen and then get a "reconnect"
message.

I'm going to test a Vista to Vista connection with the laptop today and see
if that works.

Is there anything else I should do ?

Thanks,

Jacob
 
We have see many cases like this one. You may want to try this command:
netsh interface tcp set global autotuninglevel=disabled. Or This post may
help,

Solved: Vista Remote Desktop Slow ...Using Remote desktop access Vista slow.
Resolution: 1. Disable IPv6 on the Vista. 2. Run "netsh interface tcp set
global autotuninglevel=disabled" command. ...
www.chicagotech.net/netforums/viewtopic.php?p=2715&sid=872178b9b40b6602c640a0713c3be7c6


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
 
Back
Top