Problem with slave hard disk

[Guest]

Hello Everyone!

I am in need of some help here. I have installed a Hard drive i n my
computer as a slave drive. I had some problems with the jumper to set it to
slave. Finally I get it to be reconized by the BIOS like a slave with all the
correct information. Windows itself it indicates that there is a new disc but
I can not see it in the general pannel with the C and D disk) and less make
it work.
Prevoulsy you have been able to give me the exact answer I needed, I hope
someone knows what I can try to do. Really thank you very much in advance!!!

Martin.

 

[Martin]

Hello Everyone!

I am in need of some help here. I have installed a Hard drive i n my
computer as a slave drive. I had some problems with the jumper to set it to
slave. Finally I get it to be reconized by the BIOS like a slave with all the
correct information. Windows itself it indicates that there is a new disc but
I can not see it in the general pannel with the C and D disk) and less make
it work.
Prevoulsy you have been able to give me the exact answer I needed, I hope
someone knows what I can try to do. Really thank you very much in advance!!!

Martin.

Go into Computer Managment then Disk Managment and see if the drive shows
there. If it does try to format the drive from there, should work!

This link may help you

http://support.microsoft.com/?kbid=309000


--
Best Wishes from Martin

So many questions, so few answers.

PGP Key ID, 0x581E4CE1

 

[Guest]

THanks I could see it and i started to format it!