plug and play

[jeff hughes]

plug and play insists on wrongly recognising my digital
tv card...

how can i delete the information relating to the wrong
hardware and force it to look on the installation cd?

thanks

 

[Jim Macklin]

Remove the card using the device manager and reboot. That
should give PnP a chance to properly identify the card. Be
sure you have downloaded the current and correct drivers for
it to load.


message | plug and play insists on wrongly recognising my digital
| tv card...
|
| how can i delete the information relating to the wrong
| hardware and force it to look on the installation cd?
|
| thanks

 

[Jeff Hughes]

thanks for that but sadly it still insists on wrongly
identifying the card...

 

[Guest]

go to control pane

double click on syste

click the hardware ta

click the device manager boutto

browse through and highlight the device you wish to upgrade the driver fo

right click and select update drive

go through wizard and select i wish to pick the driver to install instead of let windows earch for the driver. click nex

check the radio button for show all hardware/unsupported hardware if unchecked. click nex

click on view all hardware type

go to the unsupported device at the bottom of the list and click next

click have dis

browse to install cd's or downloaded updated driver's folder and highlight the .inf fil

keep going from ther

if it still doesn't allow you to install the driver, make sure you have a win xp driver, and that the irq isn't being shared with another device

if the irq is shared power down, remove card and move to a different slot and re-attempt driver install