PCI Slots

  • Thread starter Thread starter Pete
  • Start date Start date
P

Pete

Anyone got any ideas on how to install an Asus mobo to
get the pci cards to line up at the back so they can be
screwed in properly. Have a Lian-Li PC60 and the
backplate is always too far away even when fully screwed
in to fix the cards without dislodging them from the
slots. The height of the board seems ok and the i/o
ports position perfectly.
 
I have the same case with a Asus P4PE/L MB and the all the AGP and PCI cards
line up perfectly. Does the AGP video card have any problems kicking out
without using the card lock that is on the AGP slot.
 
-----Original Message-----
I have the same case with a Asus P4PE/L MB and the all the AGP and PCI cards
line up perfectly. Does the AGP video card have any problems kicking out
without using the card lock that is on the AGP slot.
.
The AGP just manages to sit in place but not if the
Click to expand...
screw is fully tightened. There is quite a gap with the
other cards and I have to just leave them there without
screws...works ok but a bit untidy. Mobo is A7V600
Thanks for reply

Pete
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Would you return PC with PCI slot issue? 6
Case swap - I've gone Retro 6
PCI card backplate dimensions 5
Is this USED system a good deal? 6
pci slots and blanks; usb 3
A reason I pay for for that card slot? 3
Are my CPU temps normal? 1
Mobo problem or something else ??? 6

Back
Top