OS locks up after inserting CD

G

Guest

I saw a similar post but my problem is slightly different. Everytime I
insert a CD or try to access a CD in the drive (meaning autorun was turned on
but then I turned it off to see if that was problem) Win locks up. If I take
the CD out, my computer starts working fine again. This problem only showed
up after installing a third hard drive on my system. I now have my C: and E:
(two partitions on main drive) on Secondary Master. Another single partition
drive on Secondary Slave. My CD-RW drive on Primary Master and my new third,
single partioned, drive on Primary Slave. If I take the third drive out
everything is fine, no problems with the CD-RW drive at all. I have a
BioSTAR M7NCDP (nforce2 ultra chipset) motherboard. I have XP Pro SP1. So
is this possibly something wrong with Windows (note that when no disc in
drive Windows recongizes drive just fine) or bad IDE addressing by the
motherboard? Any help or suggestions greatly appreciated
 
N

neil

Check the master & slave links on the CDRW & the new hard drive. I doubt
it's windows more likely the CDRW & the hard drive both set to the same
setting.

Neil
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top