Newbie needs help: Will this new build computer Work??

  • Thread starter Thread starter dnc_tn
  • Start date Start date
D

dnc_tn

 
Please list the parts. It will be easier for the group to
respond.
 
Yes they should all work together if you put them together carefully. That
will be $5.
I especially like the Enlight boxes.
 
I was wondering if all these parts together would work right?
I'm a newbie builder. any help would be great!
thanks.

http://www.newegg.com/app/viewproduct.asp?description=11-116-150
http://www.newegg.com/app/viewproduct.asp?description=13-131-455
http://www.newegg.com/app/viewproduct.asp?description=14-142-012
http://www.newegg.com/app/viewproduct.asp?description=19-103-379
http://www.newegg.com/app/viewproduct.asp?description=20-150-564
http://www.newegg.com/app/viewproduct.asp?description=21-103-202
http://www.newegg.com/app/viewproduct.asp?description=22-144-122
http://www.newegg.com/app/viewproduct.asp?description=27-106-192
Click to expand...
I would get a Zalman flower fan, CNPS 7000 Cu. That Barton is hot. It
went to 90 nm chip design, but increased the cache to 1 meg, doubling
the old cache, so that added more heat.
The Seagate Baracuda is quieter with a Fluid Dynamic Bearing. FDB.
Better than ball bearings. The Antec Sonata case is maybe quieter. But
there are several good cases out there. Look for a larget diameter fan,
not 80 mm.
 
I would get a Zalman flower fan, CNPS 7000 Cu. That Barton is hot. It
went to 90 nm chip design, but increased the cache to 1 meg, doubling
the old cache, so that added more heat.
Click to expand...

You what?! The Barton has only 512kb of cache, certainly doesn't run a
90nm design and will sure as hell run just fine with the stock heat sink
and fan.

Steve
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Will this ASUS Build work? Newbie needs some help 11
Need input/opinions on a new build Shuttle please 6
Building a Desktop for the first time. Are these specs OK? 12
First draft of mid-low end system, opinions welcomed (and needed) 1
Novice wants to upgrade to a P4P800 Deluxe and needs advice 9
Help me with my mobile Athlon build please (opinions) 1
Are CRT monitor registers standard? 3
Auto calculate 1

Back
Top