New SCSI HHD & Ctrl

M

M.Olivero

We installed a new 18 Gb Scsi U160 HDD attached to a new
LSI Logic U160 controller in our W2K server; then we used
Ghost to make an image of its old SCSI Wide HDD attacched
to an Acard Wide Scsi controller.
The copy was fine , but new SCSI disk hangs booting (at
W2K logo)if attacched to new SCSI controller : if we
attach new SCSI HDD to old SCSI controller everything
works fine.
How can we do to use new controller togheter with new HDD ?
Thanks in advance - M. Olivero.
 
O

Overlord

Did you use the card bios to low level format the new drive first?
Sometimes helps introduce the drive to the controller.

Did you install the drivers for the new card in windows first?
Before imaging the drive?

When it hung booting did the system have the old controller and old
drive in the system? If so, do the old drive and the new drive both
have the same SCSI ID?

Did you enable the LSI card bios to actually boot from the drive?


We installed a new 18 Gb Scsi U160 HDD attached to a new
LSI Logic U160 controller in our W2K server; then we used
Ghost to make an image of its old SCSI Wide HDD attacched
to an Acard Wide Scsi controller.
The copy was fine , but new SCSI disk hangs booting (at
W2K logo)if attacched to new SCSI controller : if we
attach new SCSI HDD to old SCSI controller everything
works fine.
How can we do to use new controller togheter with new HDD ?
Thanks in advance - M. Olivero.
Click to expand...
~~~~~~
Bait for spammers:
root@localhost
postmaster@localhost
admin@localhost
abuse@localhost
postmaster@[127.0.0.1]
~~~~~~
Remove "spamless" to email me.
 
E

Eric Gisin

Make sure the old drive is removed after imaging.

| We installed a new 18 Gb Scsi U160 HDD attached to a new
| LSI Logic U160 controller in our W2K server; then we used
| Ghost to make an image of its old SCSI Wide HDD attacched
| to an Acard Wide Scsi controller.
| The copy was fine , but new SCSI disk hangs booting (at
| W2K logo)if attacched to new SCSI controller : if we
| attach new SCSI HDD to old SCSI controller everything
| works fine.
| How can we do to use new controller togheter with new HDD ?
| Thanks in advance - M. Olivero.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

New SCSI Controller 1
Replacing SCSI drive (boot) with EIDE drive 6
CONTROLLING DRIVE LETTERS: At the BIOS level? Somewhere else? (Windows2000 Professional) 46
Got it working! First post from inside Damn Small Linux! Need morehelp pls 32
My computer does not like my new hard disk drive 5
NTLDR: couldn't open drive multi(0)disk(0)rdisk(0)partion(1) 0
moving live Windows2000 to another disk 6
Windows 2000 new install hangs... why? 1

Top