New SCSI Controller

M

M.Olivero

We installed a new 18 Gb Scsi U160 HDD attached to a new
LSI Logic U160 controller in our W2K server; then we used
Ghost to make an image of its old SCSI Wide HDD attacched
to an Acard Wide Scsi controller.
The copy was fine , but new SCSI disk hangs booting (at
W2K logo)if attacched to new SCSI controller : if we
attach new SCSI HDD to old SCSI controller everything
works fine.
How can we do to use new controller togheter with new HDD ?
Thanks in advance - M. Olivero.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

New SCSI HHD & Ctrl 2
Some of questions !? (scsi) 3
Server upgrade: Move old disks to New Hardware with different SCSI Controller. 2
Changing SCSI card 1
P2B-D with SCSI controller, ASPI error on 2003 server install 1
0 MB Disk 0 at Id 0 on bus 0 on symc8xx 5
Replacing SCSI drive (boot) with EIDE drive 6
SATA II new hard disk listed as SCSI disk 5

Top