Networking Windows XP Professional

[Guest]

I have two PCs which I networked using the wizard, a process I have done many
times before sucessfully. Having reformatted one hard drive I cannot get the
thing working again. I tried the wizard and I also tried manually configuring
IP addresses. The master PC shows it connected - (hard wired cross over
cable) - at 100 Mbps and the slave shows 400 Mbps!!

Although the PCs are obviously connected they cannot "see" each other on the
network. I tried pinging the master from the slave and got an "unreachable"
message. I have tried this with the firewalls turned off on both machines.
Can anyone please advise as to what might be wrong and how to correct it
please?
Thanks in anticipation

 

[Shenan Stanley]

I have two PCs which I networked using the wizard, a process I have
done many times before sucessfully. Having reformatted one hard drive
I cannot get the thing working again. I tried the wizard and I also
tried manually configuring IP addresses. The master PC shows it
connected - (hard wired cross over cable) - at 100 Mbps and the slave
shows 400 Mbps!!

Although the PCs are obviously connected they cannot "see" each other
on the network. I tried pinging the master from the slave and got an
"unreachable" message. I have tried this with the firewalls turned
off on both machines. Can anyone please advise as to what might be
wrong and how to correct it please?
Thanks in anticipation

Simple or Advanced networking?
Usernames/passwords match on the PCs?

 

[Guest]

Simple I assume. Just the two PCs on a home network. Neither has any user
names or passwords on the PCs as I live alone and don't need different
accounts or password protection on computers.
Any other ideas gratefully accepted
Tony S

 

[Yao Su]

Have you tried another network adapter(s)?
Maybe there's something wrong with it/them.

 

[pcbutts1]

They do have usernames and passwords. They are just configured to auto log
in. Go to the control panel>user accounts and give yourself a password. Do
the same for the other pc. Make them the same. Passwords cannot be blank.
Reboot then login, once sharing is working then reconfigure your system to
auto login. Start>run>type in CONTROL USERPASSWORDS2, press enter.

--


The best live web video on the internet http://www.seedsv.com/webdemo.htm
NEW Embedded system W/Linux. We now sell DVR cards.
See it all at http://www.seedsv.com/products.htm
Sharpvision simply the best http://www.seedsv.com

 

[Guest]

Many thanks to all who advised me. I'll try all of the suggestions. Thanks you
Tony S