network failure after SP1a install

  • Thread starter Thread starter ralph
  • Start date Start date
R

ralph

Have a LAN installed that was working fine after a clean
reinstall of XP. Updated the system using SP1a and can't
get the network working again. Ping times out etc. IP
addresses have been set corrently between the machines and
workgroup is set correctly. I'm stumped. Thanks for any
suggestions.
 
I have the same problem. Mine is a Linksys LNET110x LAN
card. It does not set correctly on boot. It does work
if you uninstall and reinstall the card using the New
Hardware Wizard, and/or if you update the drivers, but on
the next reboot it fails again. I have uninstalled and
reinstalled TCP/IP with no luck. I am stumped!
 
You must log in or register to reply here.

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

DNS failure on one machine in home network for sites outside of local NAT 1
XP Network - No DNS? 7
DNS problem 1
Local Network Failure 1
XP Home Computers Can't Share Files/Folders 1
LAN connect failure after Windows XP re-installed 6
Unsolvable NetBios Problem 9
pinging a numeric address works but not an URL (alphameric) 4

Back
Top